From a while ago I made five housings .
Expect of the last one, all housings are sold.
For the last one I miss a matching rotary-knob (NewFace Design).

I tried to reorder this knob. But 303 has stopped making Knobs and Faces.
I looked without any success for an other source.

Now I will try to sell the housing without a matching Volume-Knob.





What you will get.

- 3 sets of lenses (red/blue/transparent)
- 2 sets of push-buttons (black/transparent)
- display-cable-extension (transfer-pcb + 1mm pitch ribbon cable extension)
- all mounting stuff
- the housing itselfs.

for 150€ + shipping is all yours.

Restrictions
**************
The Installation is only for "experienced Empeg users".
You have to separate the display-board from the main-unit.
Generally it's a not recommended to remove the display-board from the main-unit.
You are doing that on your own risk.

The IR Input signal strength is absorbed throuh the lenses.
The material thickness of the lenses is greater than the original lenses.
With my universal RC I have no problems to controll my empeg in the whole room. With the original RC
the reception is limited.


Anyone interested?



Andy