
Quick Links:
Empeg FAQ
|
RioCar.Org
|
Hijack
|
BigDisk Builder
|
jEmplode
|
emphatic
Repairs: Repairs
|
#236792 - 07/10/2004 17:08
Re: Power interrupts or Loose connections. Please help.
[Re: pgrzelak]
|
new poster
Registered: 10/12/2003
Posts: 25
Loc: Bay Area, CA
|
Quote: Greetings!
The first thing is to verify that the empeg is completely seated in the sled. That is the question about the bent sled. If it is a wiring issue, there are ways the sled can be removed easily, usually with a thin metal strip inserted on each side to push the bent tabs back into place.
Thanks. But.. I'm not entirely sure how a bent top lip on the sled would affect the docking of the riocar into the sled? I mean, it doesn't hold the riocar in place at all.. it's more of a bevel that prevents the sled from being pushed too far into the car, right????
Either way, there's one thing I forgot to mention... my riocar is mounted into an overhead console and the bay is angle down at about, I dunno, 15-20 degrees. Could gravity be working against me here?
|
Top
|
|
|
|
|
|
|