
Quick Links:
Empeg FAQ
|
RioCar.Org
|
Hijack
|
BigDisk Builder
|
jEmplode
|
emphatic
Repairs: Repairs
|
#258422 - 17/06/2005 21:43
Re: Need help debricking a Rio Receiver (Dell)
[Re: Roger]
|
new poster
Registered: 17/06/2005
Posts: 4
|
Quote:
Quote: It looks like the flash bios is similar to the rio car
It's not.
Well the upgrade message is certainly the same so this is not such a silly statement.
Quote:
Quote: I'm hoping someone can help me out with a copy of the boot kernel
I doubt it -- it wasn't meant to be upgraded.
Yeah, but from that message there is obviously a process.
Quote:
Quote: and the details I need to reflash it........
If you're lucky, you'll be able to use the empeg's upgrader program, but you'll need to:
a) get hold of a serial port converter. b) get hold of the correct kernel.
Yes, I need the kernel and the start address to flash at. I've got a few other players so if I get desparate I'll desolder a flash chip from each and use a programmer to rewrite the bad one. (yes it is fine pitch smd but I could handle this if I really had to).
I'm actually hoping one of the guys who designed the little gems is still around and has kept the stuff "just in case".
I'm not stupid, I don't know how this happened, but I certainly wasn't doing anything especially dumb at the time.
|
Top
|
|
|
|
|
|
|