Hi,
Power it on. Press in and hold the volume knob, a menu will appear on the display. Rotate the knob till the "Vital Signs" is highlighted. Push the volume knob once again.
It will display the hardware configuration. It will tell you that it is a Mk2 or Mk2a in the upper left hand corner of the display. Hijack v508 should also display the amount of RAM next to the Mk2 or Mk2a. A Mk2 has 12MB, a Mk2a will have 16MB of RAM (unless it has been upgraded). The next 2 items displayed on the same line are the size of the drives installed.
As an example, most of mine have the following display:
Mk2a: 16MB, 244+244GB
Which is a Mk2a with 16MB of RAM and 2 each 250GB Disk drives.
Ross
Edited by Ross Wellington (07/09/2012 01:54)
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
Previous Topic
Index
