I was incorrect. Upon doing a cold reboot I find that it is still locking up.

This is what comes through....

empeg-car v0.04 19990121 (altman@empeg.com)
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux......................... done, booting the kernel.

Linux version 2.2.14-rmk5-np17-empeg50 (mcomb@grovepc) (gcc version 2.95.2 19991024 (release)) #7 Sat Nov 10 22:06:57 PST 2001

Processor: Intel StrongARM-1100 revision 9

NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.

empeg-car player (hardware revision 4, serial number 00102)

Command line: mem=8m

Calibrating delay loop... 207.67 BogoMIPS

Memory: 7296k/8M available (600k code, 20k reserved, 272k data, 4k init)

Dentry hash table entries: 1024 (order 1, 8k)

Buffer cache hash table entries: 8192 (order 3, 32k)

Page cache hash table entries: 2048 (order 1, 8k)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.2

Based upon Swansea University Computer Society NET3.039

Starting kswapd v 1.5

SA1100 serial driver version 4.27 with no serial options enabled

ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART

ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART

ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART

Signature is 67706d65 'empg'

Scheduling custom logo.

empeg display initialised.

empeg dsp audio initialised

empeg dsp mixer initialised

empeg dsp initialised

empeg remote control/panel button support initialised (Using FIQs).

AD520B->B94615 11358731->12142101

AD520A->B94614 11358730->12142100

AD5242->B9460A 11358786->12142090

AD5243->B9460B 11358787->12142091

AD5212->B9461B 11358738->12142107

AD521A->B9461F 11358746->12142111

AD520C->B9460E 11358732->12142094

AD5240->B9460D 11358784->12142093

AD5241->B9460C 11358785->12142092

AD521E->B9465E 11358750->12142174

empeg usb initialised, USBN9602 revision 1

empeg state support initialised 0089/8893 (save to d0005380).

empeg RDS driver initialised

empeg power state driver initialised

Linux video capture interface: v1.00

empeg FM radio driver (Philips).

RAM disk driver initialized: 16 RAM disks of 4096K size

empeg dual channel IDE

Probing primary interface...

No drives found, retrying...

No drives found, retrying...

hda: IBM-DJSA-230, ATA DISK drive

hdc: IBM-DARA-218000, ATA DISK drive

Registering drives...

ide0 at 0x040-0x047,0x078 on irq 7

ide1 at 0x000-0x007,0x038 on irq 6

hda: IBM-DJSA-230, 28615MB w/1874kB Cache, CHS=58140/16/63

hdc: IBM-DARA-218000, 17297MB w/418kB Cache, CHS=37488/15/63

empeg-flash driver initialized

Partition check:

hda: hda1 < hda5 hda6 > hda2 hda3 hda4

hdc: hdc1 < hdc5 hdc6 > hdc2 hdc3 hdc4

RAMDISK: ext2 filesystem found at block 0

RAMDISK: Loading 320 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\done.

VFS: Mounted root (ext2 filesystem).

empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.

change_root: old root has d_count=1

Trying to unmount old root ... okay

Freeing unused kernel memory: 4k init



Also why is naming the drives "hda" and "hdc" instead of
"hda" and "hdb" ?