ok, I've tried. Wanna help me troubleshoot? | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » ok, I've tried. Wanna help me troubleshoot?

Topic Options

#190594 - 23/11/2003 17:43 ok, I've tried. Wanna help me troubleshoot?
ithoughti old hand Registered: 17/07/2001 Posts: 721 Loc: Boston, MA USA	Well, I've spent the better part of 2 days trying to figure out my issues, and I have been unsucessful. My empeg seems to play fine, but I can not upload new songs to it without it getting all screwed up. I have checked for hardware problems because I have been having the "checking integrity" issue, I have also tried to check the disks by hand through hyperterminal. I have downgraded to v1.03 and back to v2.00 and performed syncs with both. Sometimes the sync will take a normal amount of time and sometimes it will "rebuild database" all day, among other errors. Here is the latest output of hyperterminal: (it's really long and it seems like there are tons of errors) ---------------------------------------------- empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004300). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: IBM-DARA-212000, ATA DISK drive hdb: IBM-DJSA-220, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: IBM-DARA-212000, 11513MB w/418kB Cache, CHS=23392/16/63 hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:d 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 4k init empeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Compl Starti ng player Hijack: intercepting config.ini hijack: removed menu entry: "Hard Disk Detection" hijack: removed menu entry: "Serial Port Assignment" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kerne l. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v347 (root@ibbm) (gcc version 2.95 .3 20010315 (release)) #2 Sun Nov 23 12:29:03 EST 2003 Processor: Intel StrongARM-1100 revision 11 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 90000983) Command line: mem=12m Calibrating delay loop... 207.67 BogoMIPS Memory: 10960k/12M available (980k code, 20k reserved, 324k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Tuner: loopback=0, ID=-1 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004400). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: IBM-DARA-212000, ATA DISK drive hdb: IBM-DJSA-220, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: IBM-DARA-212000, 11513MB w/418kB Cache, CHS=23392/16/63 hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:d 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player Hijack: intercepting config.ini hijack: removed menu entry: "Hard Disk Detection" hijack: removed menu entry: "Serial Port Assignment" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00 2003/04/01. Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 q @`Restored terminal settings Remounting first music partition read-only Remounting second music partition read-only Player exited normally: 0 Switching to shell-player loop Starting bash. empeg:/empeg/bin# ro empeg:/empeg/bin# umount /dev/hda4 empeg:/empeg/bin# umount /dev/hdc4 empeg:/empeg/bin# swapon /swapfile Adding Swap: 16596k swap-space (priority -1) empeg:/empeg/bin# fsck -fay / Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda5 is mounted. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/hda5: 1514/4096 files (0.5% non-contiguous), 9457/16384 blocks empeg:/empeg/bin# fsck -fay /dev/hda4 Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda4 is mounted. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/hda4: 3272/92160 files (7.5% non-contiguous), 2816064/2926602 blocks empeg:/empeg/bin# fsck -fay /dev/hdc4 Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hdc4 is mounted. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/hdc4: 5896/152576 files (6.8% non-contiguous), 4369839/4862970 blocks empeg:/empeg/bin# swapoff /swapfile empeg:/empeg/bin# sync empeg:/empeg/bin# empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kerne l. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v347 (root@ibbm) (gcc version 2.95 .3 20010315 (release)) #2 Sun Nov 23 12:29:03 EST 2003 Processor: Intel StrongARM-1100 revision 11 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 90000983) Command line: mem=12m Calibrating delay loop... 207.67 BogoMIPS Memory: 10960k/12M available (980k code, 20k reserved, 324k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Tuner: loopback=0, ID=-1 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004480). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: IBM-DARA-212000, ATA DISK drive hdb: IBM-DJSA-220, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: IBM-DARA-212000, 11513MB w/418kB Cache, CHS=23392/16/63 hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:d 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 ˆ%å¥¹ó½ª¹µ½Õ¹Ñ±‘“½½Ñrrrþokay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player Hijack: intercepting config.ini hijack: removed menu entry: "Hard Disk Detection" hijack: removed menu entry: "Serial Port Assignment" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00 2003/04/01. Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 Adding Swap: 16596k swap-space (priority -1) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda4 is mounted. e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hdc4 is mounted. Restored terminal settings Remounting first music partition read-only Remounting second music partition read-only Restart code received Starting player Hijack: intercepting config.ini player.cpp : 385:empeg-car 2.00 2003/04/01. Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 Adding Swap: 16596k swap-space (priority -2) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda4 is mounted. e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hdc4 is mounted. hdb: irq timeout: status=0xd0 ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0x80 hdb: drive not ready for command ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0x80 end_request: I/O error, dev 03:44 (hdb), sector 18160512 hdb: drive not ready for command hda: status timeout: status=0x80 end_request: I/O error, dev 03:05 (hda), sector 22700 hda: drive not ready for command hdb: status timeout: status=0x80 hdb: drive not ready for command ide0: reset: success hdb: irq timeout: status=0xd0 hdb: status timeout: status=0xd0 hdb: drive not ready for command hdb: status timeout: status=0xd0 hdb: drive not ready for command ide0: reset: success hdb: irq timeout: status=0xd0 ide0: reset: success VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... VM: do_try_to_free_pages failed for player... hdb: irq timeout: status=0xd0 ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0x80 hdb: drive not ready for command ide0: reset: success hdb: irq timeout: status=0xd0 ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0x80 hdb: drive not ready for command ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0xd0 end_request: I/O error, dev 03:44 (hdb), sector 15 hdb: drive not ready for command hda: status timeout: status=0x80 end_request: I/O error, dev 03:06 (hda), sector 272 hda: drive not ready for command hdb: status timeout: status=0xd0 hdb: drive not ready for command player(40): memory violation at pc=0x0207f944, lr=0x0207f92c (bad address=0xa7d2 7622, code 2) pc : [<0207f944>] lr : [<0207f92c>] sp : bdfffc98 ip : bdfffc98 fp : bdfffcb8 r10: 02153ef4 r9 : bdfffd0c r8 : bdfffd20 r7 : bdfffd1c r6 : 02153e18 r5 : 02162540 r4 : a7d2761a r3 : 02150948 r2 : bdfffc80 r1 : 00000000 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode USER_32 Segment user Control: D035917D Table: D035917D DAC: 00000015 Function entered at [<0207f908>] from [<0207f9cc>] r5 = 02162540 r4 = 02162540 Function entered at [<0207f994>] from [<02049244>] r4 = 02153E18 Function entered at [<02049230>] from [<02066da0>] r5 = 02153EF4 r4 = 02153E18 Function entered at [<02066d84>] from [<020670cc>] r4 = 00000000 Function entered at [<02066e90>] from [<02066de8>] r10 = 020AD438 r9 = 02153E18 r8 = 0000340E r7 = 00000080 r6 = 0000000E r5 = 02153E18 r4 = BDFFFD64 Function entered at [<02066dd8>] from [<020ad4f0>] Function entered at [<020ad438>] from [<020b4824>] r5 = 02153E30 r4 = BDFFFE40 Function entered at [<020b475c>] from [<020e9bbc>] r4 = 00000000 Function entered at [<020e8330>] from [<020b45a0>] r8 = 021573E4 r7 = 021573D0 r6 = 020AD438 r5 = 00000007 r4 = 00000000 Function entered at [<020b44f0>] from [<020e9bbc>] r5 = 00000000 r4 = 00000000 Function entered at [<bffffcbc>] from [<021c68f0>] ide0: reset: success Restored terminal settings Remounting first music partition read-only Remounting second music partition read-only Abnormal player termination Player received signal 11 Starting player Hijack: intercepting config.ini player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 F @Restored terminal settings Remounting first music partition read-only Remounting second music partition read-only Restart code received Starting player Hijack: intercepting config.ini player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) On DC power, quick boot e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kerne l. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v347 (root@ibbm) (gcc version 2.95 .3 20010315 (release)) #2 Sun Nov 23 12:29:03 EST 2003 Processor: Intel StrongARM-1100 revision 11 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 90000983) Command line: mem=12m noinitrd Calibrating delay loop... 207.67 BogoMIPS Memory: 10960k/12M available (980k code, 20k reserved, 324k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Tuner: loopback=0, ID=-1 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004500). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hdb: IBM-DJSA-220, ATA DISK drive hda: IBM-DARA-212000, ATA DISK drive hdb: IBM-DJSA-220, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: IBM-DARA-212000, 11513MB w/418kB Cache, CHS=23392/16/63 hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:d 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 4k init empeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player Hijack: intercepting config.ini hijack: removed menu entry: "Hard Disk Detection" hijack: removed menu entry: "Serial Port Assignment" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 --------------------------------------------------- Like I said, I've tried to do this myself, for fear that it's an issue that has happened to people many times before, but for whatever reason, I can't make it happen. Most recently, after Emplode had performed a sucessful sync, I tried to upload some tunes and got this error: 0xC004101E is "Read-only file system" (Player error) as well as this one: 0x8004003E is "Unknown error" (Emplode error) thanks for the help. _________________________ --------- //matt
Top

#190595 - 23/11/2003 19:40 Re: ok, I've tried. Wanna help me troubleshoot? [Re: ithoughti]
tman carpal tunnel Registered: 24/12/2001 Posts: 5528	You shouldn't get these errors: hdb: irq timeout: status=0xd0 ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0x80 hdb: drive not ready for command ide0: reset timed-out, status=0x80 hda: status timeout: status=0x80 hda: drive not ready for command ide0: reset timed-out, status=0x80 hdb: status timeout: status=0xd0 end_request: I/O error, dev 03:44 (hdb), sector 15 hdb: drive not ready for command hda: status timeout: status=0x80 end_request: I/O error, dev 03:06 (hda), sector 272 hda: drive not ready for command hdb: status timeout: status=0xd0 hdb: drive not ready for command It's likely that you've got a dry joint on the IDE header, a bad cable or a dying HD. Take your pick. Hopefully it's the second one as it's reasonably easy to fix.
Top

#190596 - 23/11/2003 20:56 Re: ok, I've tried. Wanna help me troubleshoot? [Re: tman]
genixia Carpal Tunnel Registered: 08/02/2002 Posts: 3411	If it's the first then I'm still local... _________________________ Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.
Top

#190597 - 23/11/2003 21:25 Re: ok, I've tried. Wanna help me troubleshoot? [Re: genixia]
ithoughti old hand Registered: 17/07/2001 Posts: 721 Loc: Boston, MA USA	If it's the first then I'm still local... ?? you're local? You lost me. _________________________ --------- //matt
Top

#190598 - 23/11/2003 21:27 Re: ok, I've tried. Wanna help me troubleshoot? [Re: ithoughti]
robricc carpal tunnel Registered: 30/10/2000 Posts: 4931 Loc: New Jersey, USA	Translation: He lives close to you and is willing to help you solder. _________________________ -Rob Riccardelli 80GB 16MB MK2 090000736
Top

#190599 - 23/11/2003 21:42 Re: ok, I've tried. Wanna help me troubleshoot? [Re: robricc]
ithoughti old hand Registered: 17/07/2001 Posts: 721 Loc: Boston, MA USA	what a sweetheart I have a spare, so I'm going to switch the cables, and I'll see what happens. Edited by ithoughti (23/11/2003 21:43) _________________________ --------- //matt
Top

#190600 - 23/11/2003 23:50 Re: ok, I've tried. Wanna help me troubleshoot? [Re: ithoughti]
ithoughti old hand Registered: 17/07/2001 Posts: 721 Loc: Boston, MA USA	I swapped the cables, here are the results from hyperterminal: _____________________________ empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) On DC power, quick boot e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kerne l. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v347 (root@ibbm) (gcc version 2.95 .3 20010315 (release)) #2 Sun Nov 23 12:29:03 EST 2003 Processor: Intel StrongARM-1100 revision 11 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 90000983) Command line: mem=12m noinitrd Calibrating delay loop... 207.67 BogoMIPS Memory: 10960k/12M available (980k code, 20k reserved, 324k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Tuner: loopback=0, ID=-1 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004600). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: IBM-DARA-212000, ATA DISK drive hdb: IBM-DJSA-220, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: IBM-DARA-212000, 11513MB w/418kB Cache, CHS=23392/16/63 hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:d 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 4k init empeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player Hijack: intercepting config.ini hijack: removed menu entry: "Hard Disk Detection" hijack: removed menu entry: "Serial Port Assignment" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00 2003/04/01. Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 ______________________________ I uploaded one song, and it seems like it still takes too long to rebuild the database, but I'll take what I can get. _________________________ --------- //matt
Top

View All Topics