Production Knobs and Buttons | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » Production Knobs and Buttons

Page 1 of 3

1

Topic Options

#204614 - 15/02/2004 19:01 Production Knobs and Buttons
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	I think we finally have some finished prototypes. The amber, blue, red, and smoke appear to be just right. The green is still a bit too yellow, so that will come later this week. Every thing fits now, as soon as we get the final price tomorrow, we'll place an order and hopefully have some to sell by the end of the week. I'll post pictures later. Stu _________________________ If you want it to break, buy Sony!
Top

#204615 - 15/02/2004 19:36 Re: Production Knobs and Buttons [Re: maczrool]
tman carpal tunnel Registered: 24/12/2001 Posts: 5528	Excellent!
Top

#204616 - 15/02/2004 19:42 Re: Production Knobs and Buttons [Re: tman]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Me too!!! Edit: Bah, humbug - I thought it was transparent! Attachments 203503-jumping.gif (166 downloads) Edited by pgrzelak (15/02/2004 19:44) _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#204617 - 16/02/2004 20:32 Re: Production Knobs and Buttons [Re: pgrzelak]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Here's a picture with everything but red. Blue is just like Brian's now as is amber and red. I'm not sure about smoke, but I think it's close as well. The knob diffuses a bit better than Brian's while the buttons are about the same. Green is still being tweaked. Anyway, here are the production pieces. The picture looks a little blue, and over exposed. Everything looks much better in person. Smoke is the knob. The top and right button are blue. The left button is the current green and the bottom button is amber. Enjoy! Stu Attachments 203814-multi-set.jpg (161 downloads) _________________________ If you want it to break, buy Sony!
Top

#204618 - 16/02/2004 20:47 Re: Production Knobs and Buttons [Re: maczrool]
oliver addict Registered: 02/04/2002 Posts: 691	excellent! where is the order page? _________________________ Oliver mk1 30gb: 129 \| mk2a 30gb: 040104126
Top

#204619 - 16/02/2004 21:02 Re: Production Knobs and Buttons [Re: oliver]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	We'll take orders via e-mail starting on Friday. The website will take a while as we'll have to take lots of pretty pictures. Stu _________________________ If you want it to break, buy Sony!
Top

#204620 - 16/02/2004 21:03 Re: Production Knobs and Buttons [Re: maczrool]
russmeister enthusiast Registered: 14/07/2002 Posts: 344 Loc: South Carolina	How much are we talking? Slap me if I've missed that somewhere. _________________________ Russ --------------------------------------------------------- "The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather a lack of will." Vince Lombardi
Top

#204621 - 16/02/2004 22:41 Re: Production Knobs and Buttons [Re: russmeister]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Around $40/set. Stu _________________________ If you want it to break, buy Sony!
Top

#204622 - 16/02/2004 22:59 Re: Production Knobs and Buttons [Re: maczrool]
Neutrino addict Registered: 23/01/2002 Posts: 506 Loc: The Great Pacific NorthWest	I think the green looks great as is! Very Nice! _________________________ No matter where you might be, there you are.
Top

#204623 - 17/02/2004 11:25 Re: Production Knobs and Buttons [Re: maczrool]
JrFaust member Registered: 07/02/2002 Posts: 193 Loc: New Richmond, WI	WOOT, can't wait to see my precious with blue and red buttons. Me too I want some me too me too. Posting a me too like some brain-dead AOLer... _________________________ Drive fast, Play it loud!!! 20GB Original Blue Lens MKIIa Rio SN 030102760, Blue Buttons. 20GB Original Green Lens MKIIa Rio SN 040103268 Grey Buttons.
Top

#204624 - 17/02/2004 12:39 Re: Production Knobs and Buttons [Re: maczrool]
foxtrot_xray addict Registered: 03/03/2002 Posts: 687 Loc: Atlanta, Georgia	Hmm.. anyone recommend some kinda diffuser for the buttons? I LOVE the blue, will probably order a FEW sets, but to go with my Mini's Interior, I need the light a little more diffused.. (Mind you, not that I'm COMPLAINING... I'll order them ANYWAYS..) Me. _________________________ Mike 'Fox' Morrey 128BPM@124MPH. Love it! 2002 BRG Mini Cooper
Top

#204625 - 17/02/2004 14:07 Re: Production Knobs and Buttons [Re: maczrool]
andym carpal tunnel Registered: 17/01/2002 Posts: 3996 Loc: Manchester UK	Nice work stu! What are the backs of the buttons like? I snagged a set of brian buttons at the amersfoort meet and I find I have to be careful not to push them too hard. The buttons push the leds into the switch leaving it stuck on. I then have to remove the facia and give the led a wiggle to free it off the switch. _________________________ Cheers, Andy M
Top

#204626 - 17/02/2004 14:39 Re: Production Knobs and Buttons [Re: maczrool]
Memil member Registered: 03/02/2002 Posts: 101 Loc: Sweden	Looks great!! Now I only have to get the "Empeg Illumination Kit".... 5 min later Done.... :-) Now, Red or blue, red or blue... Hrm... :-) /Fredrik
Top

#204627 - 17/02/2004 15:30 Re: Production Knobs and Buttons [Re: Memil]
Memil member Registered: 03/02/2002 Posts: 101 Loc: Sweden	Damn... I should have bought it from you also, didnt realize that you sold the ledkit also. I could have saved little from the shipping costs.. :-( Well well... /Fredrik
Top

#204628 - 17/02/2004 16:17 Re: Production Knobs and Buttons [Re: andym]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Thanks guys. I believe there's a little more clearance back there than what Brian's have (at least the set we have). I don't think it will be a problem with our buttons. Stu _________________________ If you want it to break, buy Sony!
Top

#204629 - 17/02/2004 17:14 Re: Production Knobs and Buttons [Re: andym]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	I have not had this problem with any of the multitudes of Brian-Button installs. Perhaps the LEDs are not installed exactly right? Cheers
Top

#204630 - 17/02/2004 17:44 Re: Production Knobs and Buttons [Re: mlord]
genixia Carpal Tunnel Registered: 08/02/2002 Posts: 3411	I think it was an issue with early buttons that Brian soon corrected. _________________________ Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.
Top

#204631 - 17/02/2004 18:46 Re: Production Knobs and Buttons [Re: genixia]
loren carpal tunnel Registered: 23/08/2000 Posts: 3826 Loc: SLC, UT, USA	Yeah, i got one of Brian's first sets, and i had to drill out the backs of the buttons a bit to make them work. But he corrected this with later sets. _________________________ \|\| loren \|\|
Top

#204632 - 17/02/2004 18:48 Re: Production Knobs and Buttons [Re: loren]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31602 Loc: Seattle, WA	Another option is to dremel down the tops of the LEDs. There is a lot of curved plastic at the tops of the LEDs that isn't necessary. I just ground the tops off of my LEDs. Mostly for the additional diffusion, but it also helped buttons fit a touch better. _________________________ Tony Fabris
Top

#204633 - 17/02/2004 23:20 Re: Production Knobs and Buttons [Re: maczrool]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	Very nice. My player is already enroute to Stu to get the glow, so I'm psyched! I wonder about the green (as I have, annoyingly, all along). Stu, could you take a pic of my player with the current green buttons on it (when you finish the light install, of course)? Then, maybe take a pic of it with the new green buttons, if you have them on hand? I ask because if the "old" greens seem to match better, I'd offer to buy the old set from you. And if the "new" greens seem better, I'd probably snatch up two sets! If I'm way overstepping my bounds with these requests / questions, I'm sorry. Just slap me (but be nice to my empeg). Thanks again _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204634 - 17/02/2004 23:24 Re: Production Knobs and Buttons [Re: FireFox31]
genixia Carpal Tunnel Registered: 08/02/2002 Posts: 3411	Just slap me (but be nice to my empeg) LOL. That's classic.. _________________________ Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.
Top

#204635 - 18/02/2004 05:09 Re: Production Knobs and Buttons [Re: maczrool]
frog51 pooh-bah Registered: 09/08/2000 Posts: 2091 Loc: Edinburgh, Scotland	I can't wait for the buttons - just did the button and knob LED install on Monday evening. Top kit, nice and easy to do...well, once I had adjusted my eyes to see the exceedingly teeny components I did come out of it with a slightly sore neck, but it was well worth it. Now I just need buttons, so I'm there as soon as payday comes around! _________________________ Rory MkIIa, blue lit buttons, memory upgrade, 1Tb in Subaru Forester STi MkII, 240Gb in Mark Lord dock MkII, 80Gb SSD in dock
Top

#204636 - 18/02/2004 08:32 Re: Production Knobs and Buttons [Re: maczrool]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	I suppose it's a bit late for this reminder, but the colour that matters, is the matching between the buttons and lens when BOTH are installed and illuminated. Not when the lens is viewed separately.. the lens colour "changes" on the player because the player does not emit white light. Cheers
Top

#204637 - 19/02/2004 08:34 Re: Production Knobs and Buttons [Re: mlord]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Fully aware of that. We don't have the lenses here for photography, so it's rather moot. The blue is the same as Brian's blue as is the red and I believe the amber as well. Stu _________________________ If you want it to break, buy Sony!
Top

#204638 - 19/02/2004 09:10 Re: Production Knobs and Buttons [Re: maczrool]
crazymelki enthusiast Registered: 16/02/2001 Posts: 373 Loc: Switzerland	Hello Stu, I must have a set of the red buttons. :-) bye _________________________ crazymelki.com
Top

#204639 - 21/02/2004 02:55 Re: Production Knobs and Buttons [Re: maczrool]
srhodes enthusiast Registered: 30/01/2000 Posts: 262 Loc: Derbyshire, UK	In reply to: We'll take orders via e-mail starting on Friday So, I can't help noticing that it is now Saturday (at least on this side of the pond). Are you ready for the deluge of orders? Would I be able to add an IDE cable to my order as well? Can I, huh? Can I? _________________________ Steve 2x80GB Mk II with Illuminated buttons
Top

#204640 - 21/02/2004 06:41 Re: Production Knobs and Buttons [Re: srhodes]
snoopstah enthusiast Registered: 07/01/2002 Posts: 339 Loc: Squamish, BC	Me too! Me too!! _________________________ Empeg Mk2a 128G with amber lit buttons kit - #30102490 PhotoVancouver \| Squamish, BC Webcam \| Personal Website
Top

#204641 - 21/02/2004 11:39 Re: Production Knobs and Buttons [Re: srhodes]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	The first order has not arrived yet; it's late. Once it's here, we still need to take pictures before we'll sell it on the site. This all takes time. But, sure you can add an IDE cable to your order. For anyone that wants to reserve a set of buttons and knobs, please e-mail "buttons.at.eutronix.com" with the model of Empeg you have and the color set you desire. We ordered 10 blue, 10 red, 5 amber, and 5 smoke. Green is still being tweaked. Stu _________________________ If you want it to break, buy Sony!
Top

#204642 - 21/02/2004 19:34 Re: Production Knobs and Buttons [Re: maczrool]
Major_Sarcasm member Registered: 28/08/2003 Posts: 149 Loc: Isle of Wight, UK	YHM! _________________________ Steve
Top

#204643 - 22/02/2004 04:09 Re: Production Knobs and Buttons [Re: maczrool]
srhodes enthusiast Registered: 30/01/2000 Posts: 262 Loc: Derbyshire, UK	Then my mail is on it's way. Apolgies for my eagerness but I'm away on a course next week and didn't want to miss out on the first batch. _________________________ Steve 2x80GB Mk II with Illuminated buttons
Top

#204644 - 22/02/2004 04:22 Re: Production Knobs and Buttons [Re: srhodes]
jaypeeq new poster Registered: 14/03/2003 Posts: 26 Loc: Syracuse NY	I want green _________________________ MK I #233 + MK2a #30102904
Top

#204645 - 22/02/2004 06:35 Re: Production Knobs and Buttons [Re: Major_Sarcasm]
Major_Sarcasm member Registered: 28/08/2003 Posts: 149 Loc: Isle of Wight, UK	Woohoo, I've finally got round to ordering my light kit too. /me can't wait... _________________________ Steve
Top

#204646 - 23/02/2004 09:11 Re: Production Knobs and Buttons [Re: maczrool]
mvigneau member Registered: 12/08/2002 Posts: 179 Loc: Manchester, NH	YHM. THANKS!!!
Top

#204647 - 23/02/2004 17:14 Re: Production Knobs and Buttons [Re: mvigneau]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Thank you everyone for your requests. The price is now finalized at $39.99 US. I neglected to mention that the first batch is only for MK2As. Sorry for those it left out. I expect this batch to arrive this week, barring any(more) unforeseen disasters. Stu _________________________ If you want it to break, buy Sony!
Top

#204648 - 23/02/2004 17:17 Re: Production Knobs and Buttons [Re: maczrool]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31602 Loc: Seattle, WA	I neglected to mention that the first batch is only for MK2As. You could also offer a service to swap out the Mk2 rotary encoder for the Mk2a rotary encoder, so that folks with the Mk2s could get a quadruple-whammy of an upgrade: Light kit, clear buttons, new (not worn-out) encoder, and new (quieter click) type of encoder... _________________________ Tony Fabris
Top

#204649 - 23/02/2004 17:31 Re: Production Knobs and Buttons [Re: maczrool]
Major_Sarcasm member Registered: 28/08/2003 Posts: 149 Loc: Isle of Wight, UK	Stu, any ideas when you'll have an order page on your site for these buttons? /me wants to get his order in asap... (or are we gonna do the ordering via this medium?) _________________________ Steve
Top

#204650 - 23/02/2004 18:25 Re: Production Knobs and Buttons [Re: tfabris]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Now that's marketing! _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#204651 - 23/02/2004 23:57 Re: Production Knobs and Buttons [Re: pgrzelak]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	Might as well bundle in a drive upgrade, digital out add on, fan upgrade, new set 'a drive sled screws, and a full exterior and interior detailing. Hm, still tweaking the green, so maybe I should order a smoke while I'm waiting. But on Mark's lense/button matching comment: Which lenses are these buttons being matched to? Original empeg, Darkstorm, or Filener? Or maybe the three are all similar enough so it will just work. I won't be pickey. My dashboard, empeg, Alpine CD lights don't match perfectly, so oh well. Thanks again, can't wait for the glow. _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204652 - 24/02/2004 06:06 Re: Production Knobs and Buttons [Re: FireFox31]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	I would guess they are being matched to the original empeg lenses. But even then, you still have the cyan color of the VFD to deal with. The LEDs are white. You will almost always have a color difference between the buttons and VFD. _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#204653 - 25/02/2004 09:16 Re: Production Knobs and Buttons [Re: tfabris]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	In reply to: You could also offer a service to swap out the Mk2 rotary encoder for the Mk2a rotary encoder, so that folks with the Mk2s could get a quadruple-whammy of an upgrade: Light kit, clear buttons, new (not worn-out) encoder, and new (quieter click) type of encoder. Thanks for the plug! We are unofficially replacing encoders. We've done one and it works fine, but we'd very much like to get a hold of the OEM model Alps encoder with .5mm of travel rather than the 1.5mm we have now, but Alps seems to deem the American market suited only for the 1.5mm ones. Anyway, we're still looking. Stu _________________________ If you want it to break, buy Sony!
Top

#204654 - 28/02/2004 10:33 Re: Production Knobs and Buttons [Re: maczrool]
snoopstah enthusiast Registered: 07/01/2002 Posts: 339 Loc: Squamish, BC	Any news on these? I desperately need a new IDE cable, but want to combine the two to save shipping _________________________ Empeg Mk2a 128G with amber lit buttons kit - #30102490 PhotoVancouver \| Squamish, BC Webcam \| Personal Website
Top

#204655 - 04/03/2004 14:12 Re: Production Knobs and Buttons [Re: maczrool]
Major_Sarcasm member Registered: 28/08/2003 Posts: 149 Loc: Isle of Wight, UK	Well, my lighting kit is installed, all I need is some transparent buttons! Any idea of an ETA? _________________________ Steve
Top

#204656 - 04/03/2004 19:25 Re: Production Knobs and Buttons [Re: Major_Sarcasm]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Supposedly they are arriving via overnight tomorrow. Stu _________________________ If you want it to break, buy Sony!
Top

#204657 - 04/03/2004 20:41 Re: Production Knobs and Buttons [Re: Major_Sarcasm]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	I second that. Just got my lit-button-installed empeg back from Stu. Lookin' good! (obligatory lit buttons pic) Can;t wait to get some of the colored ones! Attachments 207208-lit.jpg (164 downloads) _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204658 - 06/03/2004 07:52 Re: Production Knobs and Buttons [Re: FireFox31]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Thanks! The buttons (all 30 sets) arrived yesterday. We'll be contacting those that expressed interest shortly. Stu _________________________ If you want it to break, buy Sony!
Top

#204659 - 06/03/2004 08:06 Re: Production Knobs and Buttons [Re: maczrool]
crazymelki enthusiast Registered: 16/02/2001 Posts: 373 Loc: Switzerland	Cool! I am already checking my eMail in a second interval bye _________________________ crazymelki.com
Top

#204660 - 07/03/2004 13:23 Re: Production Knobs and Buttons [Re: maczrool]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	Awesome, I'll switch from checking the Eutronix site twice daily to checking my e-mail. Still watching for a green set... and a picture of the smoke because those might work well too. You know where to get me at Juno. Thanks. _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204661 - 08/03/2004 01:26 Re: Production Knobs and Buttons [Re: maczrool]
_hardcore_ member Registered: 22/09/2000 Posts: 195 Loc: Copenhagen, Denmark	Can you disclose when you plan on having buttonsets available for the MK2 ? Cheers Kaare
Top

#204662 - 08/03/2004 06:13 Re: Production Knobs and Buttons [Re: _hardcore_]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	This one was my fault. I had sent sample buttons from my spare bits bin to have castings made. Unfortunately, I had sold my Mark2 long ago, so I only had one Mark2 knob to send. Because my Mark2 was an older variety, it had the old pre-fix knob on it. That's why I had a spare knob - I put the knob fix in place, and this was left over. The cast prototypes all slipped as badly or worse than the original. Stu now has a correct (fixed) Mark2 knob to make a casting from, but it caused a bit of a delay. _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#204663 - 08/03/2004 08:38 Re: Production Knobs and Buttons [Re: pgrzelak]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Wouldn't you know it? Something was done rather poorly in the first run of parts and now it looks like all 150 pieces will have to be redone. The finish came out chalky and easy to scratch, which is not at all like the samples. No it's not your fault that there aren't MK2 knobs Paul! The correct MK2 mold was made at the time the order was placed for the MK2A parts, but the decision was made (by me) to make only a small simple run with only MK2a parts in case a problem like this arose. We're going to raise hell with the supplier today, so hopefully this can be corrected in a timely fashion. Stu _________________________ If you want it to break, buy Sony!
Top

#204664 - 08/03/2004 10:37 Re: Production Knobs and Buttons [Re: maczrool]
_hardcore_ member Registered: 22/09/2000 Posts: 195 Loc: Copenhagen, Denmark	Wouldn't you know it? Something was done rather poorly in the first run of parts and now it looks like all 150 pieces will have to be redone. The finish came out chalky and easy to scratch, which is not at all like the samples. No it's not your fault that there aren't MK2 knobs Paul! The correct MK2 mold was made at the time the order was placed for the MK2A parts, but the decision was made (by me) to make only a small simple run with only MK2a parts in case a problem like this arose. We're going to raise hell with the supplier today, so hopefully this can be corrected in a timely fashion. Ahh.. Sorry to hear about your never ending trouble with the caster. I was just being curious about the timeframe for the mk2, but you've more or less answered my question "it's coming!" which is good enough for me! Cheers Kaare
Top

#204665 - 09/03/2004 16:23 Re: Production Knobs and Buttons [Re: maczrool]
CHiP enthusiast Registered: 08/06/1999 Posts: 345 Loc: New Jersey, USA	The smoked knob looks like it has a lot of blue in it! .. but it still looks awesome! _________________________ -CHiP
Top

#204666 - 09/03/2004 23:00 Re: Production Knobs and Buttons [Re: _hardcore_]
leftyfb enthusiast Registered: 04/03/2002 Posts: 217 Loc: Lowell, MA	Not sure how to request them, but I just installed my LED kit tonight, it looks awsome and in dire need of the translucent buttons. Depending on price, I might want to order both blue and smoked. For now I just dremeled small holes into the original buttons like I saw done in a post a while ago. BTW, I received my LED kit quickly. The kit was a bit of a challenge but went off without a hitch. Keep up the good work _________________________ Mk2a 30GB Blue. Serial 030102999
Top

#204667 - 10/03/2004 08:00 Re: Production Knobs and Buttons [Re: maczrool]
tms13 old hand Registered: 30/07/2001 Posts: 1115 Loc: Lochcarron and Edinburgh	In reply to: We'll be contacting those that expressed interest shortly. How long should we expect to wait to hear from you? (Slightly concerned an email may have gone astray...) _________________________ Toby Speight 030103016 (80GB Mk2a, blue) 030102806 (0GB Mk2a, blue)
Top

#204668 - 10/03/2004 15:11 Re: Production Knobs and Buttons [Re: tms13]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Perhaps I should have expounded a bit. We ran down the list until we ran out of the first of the colors, found out they weren't up to spec and stopped emailing for that reason. More to come. Stu _________________________ If you want it to break, buy Sony!
Top

#204669 - 10/03/2004 21:51 Re: Production Knobs and Buttons [Re: maczrool]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Digging through each of the 150 pieces, it seems it was not a total loss. There are 7 red sets, and a couple amber (a little on the red side for some reason) that I feel comfortable selling. We'll be going through the list again and offering these until they're gone. Stu _________________________ If you want it to break, buy Sony!
Top

#204670 - 12/03/2004 06:06 Re: Production Knobs and Buttons [Re: maczrool]
rtundo addict Registered: 27/02/2001 Posts: 569 Loc: Albany, NY	and a couple amber (a little on the red side for some reason) Does that mean they are more of an orange color then? If so I'd be interested in a set.
Top

#204671 - 12/03/2004 11:06 Re: Production Knobs and Buttons [Re: rtundo]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Yes, more orange. I'll see if we have any left to sell. Most sets had a piece or two I would classify as a second and we don't want to sell those. Stu _________________________ If you want it to break, buy Sony!
Top

#204672 - 13/03/2004 06:39 Re: Production Knobs and Buttons [Re: maczrool]
rtundo addict Registered: 27/02/2001 Posts: 569 Loc: Albany, NY	Thanks Stu.
Top

#204673 - 17/03/2004 22:10 Re: Production Knobs and Buttons [Re: maczrool]
oliver addict Registered: 02/04/2002 Posts: 691	I received my order of buttons today, and they are pretty sweet. I took maybe 30 pictures of them. Both day and night shots too. Awesome job, I can't wait to get some more in a couple of months, hopefully some more colors _________________________ Oliver mk1 30gb: 129 \| mk2a 30gb: 040104126
Top

#204674 - 18/03/2004 11:43 Re: Production Knobs and Buttons [Re: maczrool]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31602 Loc: Seattle, WA	Stu, those pictures from Oliver look really good, let me know when you're officially in the Button Business so I can change the "Buttons" link at the top of the page to point to Eutronix. _________________________ Tony Fabris
Top

#204675 - 18/03/2004 23:36 Re: Production Knobs and Buttons [Re: oliver]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	Sweeeeeeet, you got three sets? Nice photos. Stu, if you're still "contacting interested parties via e-mail" about the buttons, I am interested in a smoke set. But, you know I'm SOOOOO interested in the green set!! Mmmmm, green. Ok, I'll stop begging and go back to checking this thread, my e-mail, and the Eutronix site every day waiting for the release of the buttons! _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204676 - 19/03/2004 08:37 Re: Production Knobs and Buttons [Re: oliver]
speedy67 enthusiast Registered: 18/12/2000 Posts: 342 Loc: South-West-Germany	Is it only on the photos or do the red ones really come out that pink when lit? Waiting for amber and vfd-with-smoke-lens-matching cyan... Keep on goin, Stu. They're great. _________________________ cheers, Thomas new owner of the MK1 00123 MK2 12GB 090000815 (my first one) MK2a 040103735 (from 303) and ???
Top

#204677 - 19/03/2004 09:06 Re: Production Knobs and Buttons [Re: oliver]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Thanks everybody! When we can get a steady flow of these going I'll let everybody know. The red is a very deep red when lit, but like any intense light, will appear whitish when viewed directly. It is less white when set at a lower level. The canera also had some effect on the pink look too I think. Stu _________________________ If you want it to break, buy Sony!
Top

#204678 - 19/03/2004 13:44 Re: Production Knobs and Buttons [Re: maczrool]
ctcsoft stranger Registered: 10/03/2004 Posts: 39	when you get a blue set available for sale please PM me. Maybe a site like M. Lords docking site could be set up? thx.
Top

#204679 - 19/03/2004 15:15 Re: Production Knobs and Buttons [Re: ctcsoft]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	In reply to: Maybe a site like M. Lords docking site could be set up? We have a website, but I don't want to put them up there until we have a steady supply to sell. Stu _________________________ If you want it to break, buy Sony!
Top

#204680 - 19/03/2004 21:48 Re: Production Knobs and Buttons [Re: maczrool]
CHiP enthusiast Registered: 08/06/1999 Posts: 345 Loc: New Jersey, USA	where are you in your list of interested parties that signed up early... or rather, where would i be in that list? thanks! looking forward to new buttons. _________________________ -CHiP
Top

#204681 - 27/03/2004 10:58 Re: Production Knobs and Buttons [Re: maczrool]
sn00p addict Registered: 24/07/2002 Posts: 618 Loc: South London	Any update on the issues that you had with the first run on buttons?
Top

#204682 - 19/04/2004 15:10 Re: Production Knobs and Buttons [Re: sn00p]
_hardcore_ member Registered: 22/09/2000 Posts: 195 Loc: Copenhagen, Denmark	Any update on the issues that you had with the first run on buttons? bump
Top

#204683 - 19/04/2004 16:57 Re: Production Knobs and Buttons [Re: _hardcore_]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	He says he was going to ship the replacements for the first batch last Friday April 16th. Stu _________________________ If you want it to break, buy Sony!
Top

#204684 - 21/04/2004 23:25 Re: Production Knobs and Buttons [Re: maczrool]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	::shudders:: Haha, here I'd been quietly telling myself three times a week: "Don't worry, Stu is just seriously stocking up on buttons before the release; hoarding enough to survive the initial blitz and still sustain for a while. Why, I bet he's got 100 sets by now. Nothing to worry about. Now, don't check the BBS for three more days and maybe he'll have released them." Haha, I know I'm causing the watched pot to not boil, but if I avoid the BBS and miss the announcement, I just know they'll be sold out by the time I find they were released. ::shudders:: See you in 3 days, and then 3 days after that, and again 3 more days, ad nauseum. _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#204685 - 22/04/2004 08:59 Re: Production Knobs and Buttons [Re: FireFox31]
maczrool pooh-bah Registered: 13/01/2002 Posts: 1649 Loc: Louisiana, USA	Are you on our mailing list? Whenever we have the kits, those on the list will be notified= no worries about missing them! Stu _________________________ If you want it to break, buy Sony!
Top

Page 1 of 3

1

View All Topics