Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 1 of 2 1 2 >
Topic Options
#215536 - 06/05/2004 12:10 New Face and Handle Pre-Sale
belezeebub
addict

Registered: 11/01/2001
Posts: 579


Okay, here is the scoop, I have the Alpha-type I have already made the following changes
Removed the Bump on the left near the button.
Raised up the lower right near the screw hole
Changed the arch around the top right where that squiggles is.

The Machinist won’t go any further or make me any more proto-types till I give him some more money (920.00 Us now with all the changes and making the handle)

So here is the scoop I am excepting Pre-orders for finished Product in Black and Electro-polished with the handle my cost is 175.00 Each I would like to sell them for 180 plus shipping to off set the amount I have already given him and the check I need to write today.

I have to order 50 blanks that is the minimum the platter will run at a time doesn’t matter which color just has to be 50 i.e., 42 black and 8 polished would be fine.

Here are some Photos of the Alpha Type I won’t have a finished proto-type till I give him more money (Uck this is getting spendy)

I was going to sell them for my cost but that was back then I only had 320us into them I don’t expect to recover my production cost just off set it a little.









Attachments
214439-facehand.jpg (175 downloads)

_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215537 - 06/05/2004 12:27 Re: New Face and Handle Pre-Sale [Re: belezeebub]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
Here is a close up of the handle its a complex part to make and with the cut out for the handle and parts this is as close as my machist can get. Still trying to find a way around this.


Attachments
214443-handle.jpg (209 downloads)

_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215538 - 06/05/2004 12:30 Re: New Face and Handle Pre-Sale [Re: belezeebub]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
Attachment not working here it is again


Attachments
214444-handle.jpg (176 downloads)

_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215539 - 06/05/2004 12:36 Re: New Face and Handle Pre-Sale [Re: belezeebub]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
Are you sure you won't consider selling brushed aluminum ones? Because I would order one instantly then.
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215540 - 06/05/2004 12:38 Re: New Face and Handle Pre-Sale [Re: BartDG]
crazymelki
enthusiast

Registered: 16/02/2001
Posts: 373
Loc: Switzerland
Here the second one for a brused aluminum!

bye
_________________________
crazymelki.com

Top
#215541 - 06/05/2004 13:33 Re: New Face and Handle Pre-Sale [Re: crazymelki]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
I would love to offer a brushed version but as I said before the Brushing is done by hand and the platter wants 25 minimume to do any brushed look.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215542 - 06/05/2004 13:39 Re: New Face and Handle Pre-Sale [Re: belezeebub]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
Maybe you can convince him to do less.

In any case I'm still interested and if all else fails I guess I would go for an electro polished version. But I'll hold off in case the brushed version does become a possibility.

I think you've done an excellent work with those fascias ! They're hands-down the best looking version of the fascia I've seen to date! Terrific job !!
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215543 - 06/05/2004 15:16 Re: New Face and Handle Pre-Sale [Re: BartDG]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
I tired, I even offered to never date his daughter if he would do a smaller run, but he seems hard set, I'll keep trying and let you know.

Right now I need to get 25 or more people to pre-order so I can get him going on the blanks.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215544 - 06/05/2004 15:29 Re: New Face and Handle Pre-Sale [Re: belezeebub]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
LOL! Good one!

OK, count me in for one, for the moment electro polished. (with the hope of a brushed one )
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215545 - 06/05/2004 15:43 Re: New Face and Handle Pre-Sale [Re: belezeebub]
Mach
old hand

Registered: 15/07/2002
Posts: 828
Loc: Texas, USA
I'm in...1 electro-polished. When do you need the $?

Top
#215546 - 06/05/2004 18:03 Re: New Face and Handle Pre-Sale [Re: belezeebub]
Glen_L
member

Registered: 24/02/2003
Posts: 111
Loc: Elk Grove, CA
I'm only interested in brushed aluminum as well
_________________________
No longer a stranger, finally a full-fledged member! \:D

Top
#215547 - 07/05/2004 03:13 Re: New Face and Handle Pre-Sale [Re: Glen_L]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
Hey, that's 3 people already. Maybe we will reach that number 25 ! (I sure hope so!)
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215548 - 07/05/2004 08:32 Re: New Face and Handle Pre-Sale [Re: belezeebub]
Micman2b
addict

Registered: 27/12/2001
Posts: 441
Loc: Central, NC, USA
So, it is $180us for the face, either black or polished, and a handle. Is the handle going to be either black or polished also???

I may be up for a black one.

Sean in NC
_________________________
_____________
Sean in NC
130gb MK2a w/ 32mb ram
80gb MK2a empeg spare

Top
#215549 - 07/05/2004 08:32 Re: New Face and Handle Pre-Sale [Re: BartDG]
Glen_L
member

Registered: 24/02/2003
Posts: 111
Loc: Elk Grove, CA
Running a quick forum search revealed three others (amidst much clamoring from me ) that were at one time interested in brushed aluminum. I've e-mailed/PM'd them a link to this thread.
_________________________
No longer a stranger, finally a full-fledged member! \:D

Top
#215550 - 07/05/2004 08:55 Re: New Face and Handle Pre-Sale [Re: Micman2b]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
180 Includes a matching handle is black or polished or brushed if I can get them.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215551 - 07/05/2004 09:20 Re: New Face and Handle Pre-Sale [Re: belezeebub]
mandiola
enthusiast

Registered: 26/12/2001
Posts: 386
Loc: Miami, FL - Sioux Falls, SD
I was interested in brushed also.. problem is i'm a poor college student and won't have that kind of money to spend for a while. I'd order one if that changes though.

-Greg

Top
#215552 - 07/05/2004 09:41 Re: New Face and Handle Pre-Sale [Re: belezeebub]
crazymelki
enthusiast

Registered: 16/02/2001
Posts: 373
Loc: Switzerland
Cool! So this means, that I will get my brushed..

Thanks in advance...

bye
_________________________
crazymelki.com

Top
#215553 - 07/05/2004 15:08 Re: New Face and Handle Pre-Sale [Re: crazymelki]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
It means I am going to keep trying to get brushed.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215554 - 09/05/2004 23:04 Re: New Face and Handle Pre-Sale [Re: belezeebub]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
Humm so far we are a far cry from the 25 I need to place the order.

I'll give it some more time
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215555 - 09/05/2004 23:59 Re: New Face and Handle Pre-Sale [Re: belezeebub]
music
addict

Registered: 25/06/2002
Posts: 456
I already committed to Thomas for his (original 303 Newface) version of the face in this thread.

But everyone seems to have forgotten about that thread.

So, some clarification please.

Are you two both providing competing faces?
Or did he transfer the 303 data to you?
Or has he cancelled his plans to make the 303 faces, after you did your prototypes?

If you're looking for some commitments, here's my decision tree:

  • if (speedy67 makes bruface/bruhandle) buy from speedy67;
  • else if (belezeebub makes brushed aluminum) buy from belezeebub;
  • else /* no brushed aluminum available */ purchase=NO;


Note, for those across the pond, please 's/aluminum/aluminium/g' to avoid cringing and whingeing.


Top
#215556 - 10/05/2004 08:25 Re: New Face and Handle Pre-Sale [Re: music]
speedy67
enthusiast

Registered: 18/12/2000
Posts: 342
Loc: South-West-Germany
Are you two both providing competing faces?
Or did he transfer the 303 data to you?
Or has he cancelled his plans to make the 303 faces, after you did your prototypes?


We are not competing, as we have different styles in process.
I still havn't got the CNC-data from 303.
My plans are: first do original 303 production with a matching handle. Then having a closer look at beakers design and perhaps produce it, or perhaps after talking to RobV making original style in alu.
This process will take a while!!! Even if i have the data from 303, i have to rely on friends, who are no empeggers. And i'm low on time, too.
So if you are in a hurry, go for beelzebubs great work. You'll have to be patient for mine.
Hope this wipes away any confusion...
_________________________
cheers, Thomas new owner of the MK1 00123 MK2 12GB 090000815 (my first one) MK2a 040103735 (from 303) and ???

Top
#215557 - 10/05/2004 22:11 Re: New Face and Handle Pre-Sale [Re: belezeebub]
tracerbullet
addict

Registered: 08/01/2002
Posts: 419
Loc: Minnesota
Also would like to see a brushed version available. I recently installed a mid-range Sony CD / tuner deck underneatht he empeg, with a brushed face. Would like them to match.

Top
#215558 - 12/05/2004 11:40 Re: New Face and Handle Pre-Sale [Re: tracerbullet]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
I am working on getting a brushed version right now there doesn't seem to be enough people wanting a new face at the cost I have posted to warrent me making them I need to order 25 at a time and so far maybe 12 people have posted, I'll give it some more time.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215559 - 12/05/2004 12:29 Re: New Face and Handle Pre-Sale [Re: belezeebub]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
I sure hope this won't stop you from having then made because I really want one! But indeed, it seems almost everyone wants it brushed... (me too for that matter )
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215560 - 14/05/2004 09:51 Re: New Face and Handle Pre-Sale [Re: BartDG]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
Shameless self serving bump.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215561 - 14/05/2004 10:32 Re: New Face and Handle Pre-Sale [Re: belezeebub]
pgrzelak
carpal tunnel

Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
Question: Do you have, or can get, matching hex screws for the polished fascia?

Edit: Actually, I would perfer brushed also...


Edited by pgrzelak (14/05/2004 10:36)
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs

Top
#215562 - 17/05/2004 08:47 Re: New Face and Handle Pre-Sale [Re: pgrzelak]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
I can try to get matching screws, let me check around.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215563 - 17/05/2004 13:56 Re: New Face and Handle Pre-Sale [Re: belezeebub]
belezeebub
addict

Registered: 11/01/2001
Posts: 579
Ok I can get color matched hardware (it won't be brushed screws but it will match color wise)

I have tapering down the handle so that it is closer to matching the profile of the new face and switching to a smaller screw to assemble the handle.

a few have sent messages stating they would get one or two

lets assume I can get the much wanted "Brushed" look I still need to get 25 units to place the order by my count about 12 people have said they would get a brushed version of the face and handle.
_________________________
______________________________________ Do not meddle in the affairs of Network Administrators, for they are subtle and quick to anger. ______________________________________ Worlds Lamest Wb Site (mine) http://home.comcast.net/~jlipchitz/

Top
#215564 - 17/05/2004 15:06 Re: New Face and Handle Pre-Sale [Re: belezeebub]
BartDG
carpal tunnel

Registered: 20/05/2001
Posts: 2616
Loc: Bruges, Belgium
I'm keeping my fingers crossed that those brused fascia's WILL become a reality!
Come on people ! Only 13 more to go !!!
_________________________
Riocar 80gig S/N : 010101580 red
Riocar 80gig (010102106) - backup

Top
#215565 - 19/05/2004 20:37 Re: New Face and Handle Pre-Sale [Re: BartDG]
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
I'm looking for one brushed and one black anodized, however, at this time I'm still heavily leaning toward (favoring) 303's original design.

My desire is the fascia, I'm not so concerned about the handle (I have one that I've brushed myself and another which I can easily coat in a suitable black).

However, my main desire is really for the rounded farnel buttons instead of the standard triangular mk2a buttons. I would not want to use the stock knob either, so the fascia should also accomodate a new rotary knob, perhaps the alpine.

I was hoping Thomas had already received the data from Tim... Of course I still have to source a few things for my new install. Like a new sled and wiring harness, ISO connector and a red/amber face to match the other BMW lit doodads.

Bruno
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top
Page 1 of 2 1 2 >