Can't get emplode to detect Empeg | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » Can't get emplode to detect Empeg

Topic Options

#247131 - 21/01/2005 18:43 Can't get emplode to detect Empeg
Phireman19 member Registered: 15/06/2002 Posts: 127	I have searched and read the FAQ and cant come up with why it won't detect it. This is my second Empeg and it was working fine, then my hard drive crashed on my computer and had to reinstall all my software and what not. Now it does not detect the Empeg. I am on windows XP, and I have version 2.0 on the empeg and emplode. I have always used the crossover cable connection. Any quick help anybody? I had this problem before, but I can't remember what fixed it. Tim Edited by Phireman19 (21/01/2005 19:38)
Top

#247132 - 21/01/2005 18:51 Re: Can't get emplode to detect Empeg [Re: Phireman19]
Phireman19 member Registered: 15/06/2002 Posts: 127	It is detecting it using the serial cable, but not ethernet.
Top

#247133 - 21/01/2005 19:39 Re: Can't get emplode to detect Empeg [Re: Phireman19]
Phireman19 member Registered: 15/06/2002 Posts: 127	I ran the upgrade wizard and upgraded it, but still not detecting it with crossover cable. How do I check the drivers for it. I read about the device manager, but I don't find anything there?
Top

#247134 - 21/01/2005 19:48 Re: Can't get emplode to detect Empeg [Re: Phireman19]
wfaulk carpal tunnel Registered: 25/12/2000 Posts: 16706 Loc: Raleigh, NC US	If you're connecting (or trying to connect) via ethernet, there are no drivers. Some people have had problems with XP's built-in firewall. Try disabling it and see if that works. If so, you can then reenable it and do whatever tweaks are necessary to open that hole. I'm sure someone on here has listed what those tweaks are. _________________________ Bitt Faulk
Top

#247135 - 21/01/2005 21:51 Re: Can't get emplode to detect Empeg [Re: Phireman19]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	Quote: I have searched and read the FAQ and cant come up with why it won't detect it. Specifically, did you go through this particular part of the FAQ? _________________________ Tony Fabris
Top

#247136 - 22/01/2005 22:47 Re: Can't get emplode to detect Empeg [Re: tfabris]
Phireman19 member Registered: 15/06/2002 Posts: 127	I checked that, I finally got that to work right, and it shows : IP address 66.209.234.41 Subnet Mask 255.255.252.0 My empeg is 192.168.1.2 So, what do I need to do from here ?
Top

#247137 - 23/01/2005 01:02 Re: Can't get emplode to detect Empeg [Re: Phireman19]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	You need to set your Empeg to use DHCP for an ip address, or perhaps manually force it to use an available one that begins with 66.209.234. This is done with Emplode.
Top

#247138 - 23/01/2005 11:49 Re: Can't get emplode to detect Empeg [Re: mlord]
schofiel carpal tunnel Registered: 25/06/1999 Posts: 2993 Loc: Wareham, Dorset, UK	...or correct your subnet mask value to 255.255.255.0 _________________________ One of the few remaining Mk1 owners... #00015
Top

#247139 - 23/01/2005 12:07 Re: Can't get emplode to detect Empeg [Re: schofiel]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	Nothing wrong with that subnet mask.
Top

#247140 - 23/01/2005 13:15 Re: Can't get emplode to detect Empeg [Re: Phireman19]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	Quote: IP address 66.209.234.41 Subnet Mask 255.255.252.0 I'm assuming that this is your PC's address? That's a public internet address, not a local LAN address. Your first step should be to put yourself behind a NAT router as described here, then both your PC and the empeg will be able to have a nice, safe, local 192.168 address and not be exposed to the internet. _________________________ Tony Fabris
Top

#247141 - 24/01/2005 19:11 Re: Can't get emplode to detect Empeg [Re: tfabris]
Phireman19 member Registered: 15/06/2002 Posts: 127	Yes that was the PC's address. I changed the network connection to 192.168.0.1 and the players to 192.168.0.2 and it found it. Thanks for the help!!!! Tim Edited by Phireman19 (24/01/2005 19:18)
Top

View All Topics