Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 1 of 2 1 2 >
Topic Options
#37347 - 28/08/2001 10:19 Just got my tuner!
jwtadmin
enthusiast

Registered: 05/09/2000
Posts: 210
Loc: Ipswich, MA
Fed Ex just arrived with My tuner!

Sonic Blue still has it pending shipment!

Funny there is no Rio logo on it at all.

SN just in case we are tracking is:

2811700004099

I was going to do the whole take a picture of the box and contents, but I'm going out to put it in my car!

John

_________________________
___ John Turner "It's easier to ask for forgiveness than to ask for permission"

Top
#37348 - 28/08/2001 11:03 Re: Just got my tuner! [Re: jwtadmin]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5335
Loc: Cambridge UK
Congratulations

Let us know how the install goes..

Rob



Top
#37349 - 28/08/2001 11:20 Re: Just got my tuner! [Re: rob]
jwtadmin
enthusiast

Registered: 05/09/2000
Posts: 210
Loc: Ipswich, MA
Installed in about 5 min.

I left the sled in place.

During my Empeg install last year, I manuvered the antenna wire and the tuner plug so that they would be acessable through the hole in the sled.

It was a bit tight working in the sled but I was able to get the plugs connected.

Fired it up and it worked perfectly!
Now I just need to find my remote!

One feature that would be nice is auto preset loading. My home reciever has the ability to scan the whole FM range and automaticaly set all of the presets to the strongest signals.

Thanks for all of your efforts to bring this to us!!!

John T.

_________________________
___ John Turner "It's easier to ask for forgiveness than to ask for permission"

Top
#37350 - 28/08/2001 11:22 Re: Just got my tuner! [Re: jwtadmin]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5335
Loc: Cambridge UK
I noticed John playing around with station scanning a while ago - I don't know if that will become a 2.0 feature though.

Rob



Top
#37351 - 28/08/2001 13:50 Re: Just got my tuner! [Re: jwtadmin]
wvloon
journeyman

Registered: 13/08/2000
Posts: 82
Loc: Near Arnhem, Netherlands
Wow, now we're sure they do actually exist I'm sure it was worth the (extended) wait.

[jealous mode]
Just a bit curious about your queue number since my MK2 serial is lower than yours....
[/jealous mode]

W@lly.nl
--------------------------------------
Reg:1934/Mk1:158-6Blue(sold)/Mk2:380-12Amber
_________________________
W@lly.nl ------------------------ Reg:1934/Mk1:158-Blue(sold)/Mk2:380-Amber(sold)/Mk2a:3273-Blue

Top
#37352 - 28/08/2001 14:01 Re: Just got my tuner! [Re: jwtadmin]
SuperQ
addict

Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
I got word from my roomie that mine has arrived as well.. I should have it installed tonight.. will try and take more pictures this time... w00t!*@%

12gig red mk2 -- 080000125
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)

Top
#37353 - 28/08/2001 14:12 Re: Just got my tuner! [Re: jwtadmin]
CruzThs
member

Registered: 19/01/2001
Posts: 145
Loc: San Francisco Bay Area
Got mine this morning. However I won't have time to install it until this weekend.


Top
#37354 - 28/08/2001 18:35 Install Pr0n [Re: jwtadmin]
SuperQ
addict

Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
hey, i just finished installing the tuner module, it was no big deal, and I got to fix a dashboard rattle. I tooks some install pr0n.. have fun tfabris ;)

http://ben.nerp.net/pix/empeg/

img_*.jpg are the files from the tuner, others are just other pics of the empeg's insides.

12gig red mk2 -- 080000125
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)

Top
#37355 - 28/08/2001 20:56 Re: Just got my tuner! [Re: jwtadmin]
kazama
enthusiast

Registered: 11/11/2000
Posts: 202
Loc: Boston, MA
Alas no tuner yet but I do have this so as long as FedEx doesn't break down, a couple of days:

Dear Greg:

Your order from the SONICblue eStore has been shipped and your credit card has been charged.

Product Name Qty Ordered Qty Shipped Price
--------------------------------------------------
Rio Car Tuner 1 1 $ 99.95
--------------------------------------------------
Shipping: $ 3.95
Total: $ 103.90




Top
#37356 - 29/08/2001 00:45 Re: Just got my tuner! [Re: SuperQ]
Lemmy
member

Registered: 03/12/1999
Posts: 118
Loc: Germany
Dunno nuthin bout my one yet...
But what I know is that the additional 20Gig HD arrived yesterday and as I didn't think the shop would be that fast I didn't leave my wife enough $$ to accept it... Woah! less than 24 hours!!! E-commerce is working!


bye
[L]


_________________________
--- Mk. I Blue 4G Serial [dont remember] Mk. II Green 6G+20G Serial 080000372

Top
#37357 - 29/08/2001 03:46 Re: Install Pr0n [Re: SuperQ]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5335
Loc: Cambridge UK
It's interesting that the radio station you were listening to was broadcasting RDS packets - but without any data.

Rob



Top
#37358 - 29/08/2001 17:29 Re: OT RDS display [Re: rob]
muzza
Pooh-Bah

Registered: 21/07/1999
Posts: 1765
Loc: Brisbane, Queensland, Australi...
What is the strangest RDS Message your radio station displays?

JJJ in Australia has If pain persists consult your doctor

Murray 06000047
Just increasing my post count
_________________________
-- Murray I What part of 'no' don't you understand? Is it the 'N', or the 'Zero'?

Top
#37359 - 29/08/2001 18:40 Re: Just got my tuner! [Re: jwtadmin]
flashman
member

Registered: 20/09/2000
Posts: 133
Loc: U.S.
Got mine.....
Painless install!!! Sweet!!!
My only problems were the manual refers to buttons on the remote that don't exist as I have the old style Kenwood remote.
So it was frustrating figuring out which button was what by trial and error.

Only two more questions....
1. When I press the DNPP button (visual chooser) I get this faint line that appears across the screen.. ???
Which leads me to my next question.....

2. How do I switch to Visuals while listening to the Radio?????
Please, Please tell me you guys did not allow for visuals and info screen switching to occur.
The RDS info is nice and i like it but, I want to be able to see my wonderfull Funnel Web while listening to the Radio.

12Gb MKII 080000516 Blue
_________________________
12Gb MKII 080000516 Blue 20Gb MKII 010101303 Green 20Gb MKII 090001020 Green 30Gb MKII 10101980 Blue

Top
#37360 - 29/08/2001 22:01 Re: Just got my tuner! [Re: jwtadmin]
Ruffles
member

Registered: 29/03/2000
Posts: 106
Loc: Seattle, WA
I just finished installing my Tuner and it works great. The only thing I would like to see is some type of tab with a hole in it to make it easier to secure with zip ties. The signal strength meter works great and helped me trouble shoot a loose attenna ground. I also get a faint blue line when I hold down the menu button. I figured this was just to indicate that the player is in "enter preset" mode. I'm very happy with it.




Top
#37361 - 29/08/2001 22:24 Re: Just got my tuner! [Re: Ruffles]
Kit
journeyman

Registered: 03/10/2000
Posts: 69
Loc: San Diego, CA US
So, my remote is broken (support is already shipping me a new one), but until this arrives is there a way to get into the tuner preset config? I couldn't find a way to do this without the remote, making the tuner difficult to navigate.

Other than that install with a breeze.

-Kit

-Kit


Top
#37362 - 30/08/2001 04:09 Re: Just got my tuner! [Re: Lemmy]
Lemmy
member

Registered: 03/12/1999
Posts: 118
Loc: Germany
done with installing 2nd HD.. the description in the FAQ area is very good...
but still no hints from my tuner??
Did empeg ship the MkII in order of serial numbers?


bye
[L]

---
Mk. I Blue 4G Serial [dont remember]
Mk. II Green 6G+20G Serial 080000372
_________________________
--- Mk. I Blue 4G Serial [dont remember] Mk. II Green 6G+20G Serial 080000372

Top
#37363 - 30/08/2001 04:27 Re: Just got my tuner! [Re: flashman]
Derek
addict

Registered: 16/08/1999
Posts: 453
Loc: NRW, Germany
As I understand it, software for driving the visuals while listening to the radio doesn't exist yet. The problem there is feeding the signal back into the CPU. In the Mk1 this is impossible, but the Mk2 has an ADC, so it might be possible on the Mk2. I think it is only a single channel ADC though - the guys@empeg will have to fill you in properly on all of that.

(list 6284, Mk1 S/N 00299 4GB blue [for sale]. Mk2 S/N 080000094 6GB blue)
_________________________
(list 6284, Mk1 S/N 00299 4GB blue [sold]. Mk2 S/N 080000094 20GB blue)

Top
#37364 - 30/08/2001 04:52 Re: Just got my tuner! [Re: Lemmy]
Roger
carpal tunnel

Registered: 18/01/2000
Posts: 5683
Loc: London, UK
Did empeg ship the MkII in order of serial numbers?

If you mean the serial number of the mk2, in general, yes. The serial numbers were assigned in order of construction.

However, because the batch sizes were larger, which one you get out of a batch is fairly arbitrary, meaning that you might get a number higher than the next person.

Also, a small number were sent back for reengineering, but retained the earlier serial number.




Roger - not necessarily speaking for empeg
_________________________
-- roger

Top
#37365 - 30/08/2001 05:34 Re: Just got my tuner! [Re: Derek]
altman
carpal tunnel

Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
It's stereo, but isn't hooked up yet. It won't make v2.0, but may make a later v2 release.

Hugo



Top
#37366 - 30/08/2001 11:36 Here's a picture [Re: Ruffles]
Ruffles
member

Registered: 29/03/2000
Posts: 106
Loc: Seattle, WA
He is a pictue of the tunner in action. Looks like we get AM Stereo!



Attachments
36668-RioCar.jpg (105 downloads)


Top
#37367 - 30/08/2001 11:53 Re: Here's a picture [Re: Ruffles]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5335
Loc: Cambridge UK
See, I told you the tuner was great value!

Rob



Top
#37368 - 30/08/2001 12:58 Re: Here's a picture [Re: Ruffles]
jimhogan
carpal tunnel

Registered: 06/10/1999
Posts: 2591
Loc: Seattle, WA, U.S.A.
Hmmm. I'm pretty sure I remember Rob and crew promising IBF (Integrated Bombast Filter) functionality under AM, but from your pic it looks like they're taking a different approach. The only thing I can guess is that they've implemented this by piping in-phase Rush to the Right Channel and out-of-phase Rush to the Left Channel, thus providing some kind of IBF emulation.

Nifty. How *do* they do it?

Jim

_________________________
Jim


'Tis the exceptional fellow who lies awake at night thinking of his successes.

Top
#37369 - 30/08/2001 13:07 Re: Here's a picture [Re: rob]
Henno
addict

Registered: 15/07/1999
Posts: 568
Loc: Meije, Netherlands
Has shipping into Europe/RoW started yet?

Henno
mk2 6 nr 6
_________________________
Henno mk2 [orange]6 [/orange]nr 6

Top
#37370 - 30/08/2001 21:25 Re: Just got my tuner! [Re: jwtadmin]
JoMo25
stranger

Registered: 23/07/2000
Posts: 48
I just found out that FedEx shipped my 2 tuners (one for each sled) yesterday, but the windy day yesterday must have blown my notice away!

I'm gonna pick them up tomorrow. Thank God I've got the extra day this weekend to install them!

I can't wait! I do miss the radio occassionally. I find I'm not keeping up with new music as well as I used to...


Top
#37371 - 30/08/2001 23:25 Re: Just got my tuner! [Re: JoMo25]
msaeger
carpal tunnel

Registered: 23/09/2000
Posts: 3608
Loc: Minnetonka, MN
" I find I'm not keeping up with new music as well as I used to..."


are you sure that's a bad thing :-)


32Gig MK2 In 2001 VW Golf TDI
_________________________

Matt

Top
#37372 - 31/08/2001 01:10 Re: Here's a picture [Re: Henno]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5335
Loc: Cambridge UK
No, they haven't arrived at Cambridge yet (as far as I know - I have a day off today).

I'll chase them up on Monday, but I don't think anyone's sitting on them at this stage.

Rob



Top
#37373 - 31/08/2001 07:55 Re: Install Pr0n [Re: rob]
SuperQ
addict

Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
I was trying to figure out that too.. I've only had one station show up with RDS, and there wasn't any data coming across that I could see.. I'm going to seriously play around with the tuner this weekend.. i've been moving into a new apartment so i have been driving around a pickup for 2 days.. wow was it wierd to go from a ford clutch to a VW. ;)

I noticed 2 things about the 1.3 software..

#1: the signal strength meter doesn't work
#2: the AM radio preformance sucks.. but I'm going to check the install to make sure it's not my fault.



12gig red mk2 -- 080000125
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)

Top
#37374 - 31/08/2001 08:14 Re: Install Pr0n [Re: SuperQ]
trevorp
member

Registered: 08/06/2000
Posts: 144
Loc: Ft Lauderdale, FL
Hmm, my signal strength meter works great. The big local stations always show as full strength (they should), but the smaller stations or the ones that are further away show lower strength, and even fluctuate while driving around.

My AM reception seems to works fine too, but there are VERY few decent stations here to compare with.

-Trevor

-----
Mk 2, Green 12GB 080000349
_________________________
-Trevor

-----
Mk 2, Green 12GB, Tuner, 2.0b11, 080000349

Top
#37375 - 31/08/2001 09:30 Re: Install Pr0n [Re: SuperQ]
altman
carpal tunnel

Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
Is your install in a VW? If so, AM will suck unless you feed power to the antenna. VW antennas (eg, passat, beetle, golf) have a powered antenna, with an amp in the base of it. You can get an antenna power adapter which can be wired to the antenna remote line on the tuner and all will be well.

Hugo



Top
#37376 - 31/08/2001 11:00 Re: Install Pr0n [Re: trevorp]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31602
Loc: Seattle, WA
Yeah, my signal strength meter works fine, and I get great AM radio performance. I think Hugo is right, he doesn't have power to his antenna booster. On my VW GTI, I used the amp remote line to power the antenna booster.

___________
Tony Fabris
_________________________
Tony Fabris

Top
Page 1 of 2 1 2 >