Remote Receiver Light Blinking Red??????

Posted by: kendrick

Remote Receiver Light Blinking Red?????? - 13/02/2005 06:53

When i boot my empeg I noticed it taking a lot longer to load up, so i hooked it up to my serial port and viewed the hypterminal .
When it boots up i see this

IrDA: Registered device irda0
irlap_driver_rcv(), Unknown frame ef received!
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4086d000
irlap_driver_rcv(), Unknown frame ef received!
irlap_driver_rcv(), Unknown frame ef received!
irlap_driver_rcv(), Unknown frame ef received!

Then my IR light starts blinking red ??

Any ideas?

Posted by: schofiel

Re: Remote Receiver Light Blinking Red?????? - 13/02/2005 09:32

Your IR light?

Posted by: cushman

Re: Remote Receiver Light Blinking Red?????? - 13/02/2005 12:17

Quote:
irlap_driver_rcv(), Unknown frame ef received!

Do you have Empire installed? This may be your problem, but it is probably not causing your player to take longer to boot up. Something else is taking your player a while to boot up, and this is probably a symptom.

Posted by: tfabris

Re: Remote Receiver Light Blinking Red?????? - 13/02/2005 15:14

Check and see if your infrared problem is related to this.

Check and see if your long boot up is caused by this and/or this.