HSX-109 RIO CENTRAL HDD DAMAGED!! I NEED THE SOFTWARE TO REPLACE HDD

Dear friends

i have a RIO CENTRAL HSX-109 but today the hard drive have a NOISE and doesnt work.

I put the HDD into a computer and run HDD REGENERATOR but the hard disk have too many damaged sectors..

i purchase other IDE HDD with more space, but i need the ISO image or the installer to reinstall the RIO operative system.

Any person can help me with the ISO or TAR.GZ image to reinstall my RIO?

Or what is the procedure to put a NEW HDD without cloning the OLD ONE? because my old one is damaged

PLEASE!

THANKS

I have an ISO of 1.02.

Send me a private message, and I will give you a Dropbox link.

I have a RIO Central HSX-109 the HDD has crashed after moving from Chicago... I have a MAXTOR 120 HDD is was working perfectly.. I need an ISO or TAR.GZ image to get my RIO back up..

HELP, PLEASE

Thanks

AMorgan2

Bumping this up - I have two Centrals with v1.02 FW and need both the original CD (or an ISO thereof) plus a working v1.10 ISO and instructions on how to upgrade the units...there was no User Guide included with either.

Thanks!

Thanks for the help, Rob - now have a working v1.02 ISO.

Off to find a 120GB Maxtor HD.

And hopefully a good v1.10 ISO...

I do have another HSX109 ISO file that may be 1.10. When I look at the files inside the ISO, they have a date of 19 November 2002. The same files on the known 1.02 ISO are dated 16 January 2002.

I will upload the unknown ISO to Dropbox and you can have a look at it. I'll send a PM shortly...