Hi guys, it's been a while! I just picked up a Sirius tuner and need to feed the signal into the Empeg's aux input. Problem now (going straight from Sirius tuner's RCA out to Empeg's Aux in) is that there is too much distortion. Did some research and found that the tuner is putting out 2V RMS and the empeg takes 1V input.

What can I use to step down the voltage? I have a line level converter with wire inputs on one side and RCA outputs... should I retro-fit some Radio Shack RCA's to the other end and play with the level?

Thanks.