Well I followed that list of commands and after the SYNC command I unplugged the power cord and cycled power but I still can't synchronize. Here's a paste of the serial log after I first started up. For some reason, in Hyperterminal when i scrolls up beyond the screen the text gets garbled somewhat so hopefully you can see something in this:

Linux version 2.2.17-rmk5-np17-empeg52-hijack-v335 (root@ibbm) (gcc version 2.95r pump...VFS: Mounted
Linux NET4.0 for Linux 2.2donly.
Based
.3 20010315 (release)) #2 Tue May 13 15:01:19 EDT 2003_root: old root has d_count=1
NET
Processor: Intel StrongARM-1100 revision 11ay
IP Protocols: ICMP, UDP
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.84 bhash 16384)
I see this is a developer image!
Ir
empeg-car player (hardware revision 9, serial number 30103111)usic partition
IrCOMM protocol (Dag Brattli) /d
Command line: mem=16mt go
Starting kswapd
Calibrating delay loop... 207.67 BogoMIPS
IrCOMM protocol (Dag Brattli)D12 id 1012
Starting kswapd v 1.5
empeg state support
SA1100 serial driver version 4.27 with no serial options enabled
player.
empeg RDS driver initialis
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UARTiver initialised (first boot)empeg car - 2.1434
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UARTialized: 16 RAM disks of 4096K sizeisk.cpp
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UARTg single channel IDE
Pro
Signature is 206f6972 'rio 'fsck 1.19, 13-Jul-2000 f
hda
Found custom animation at offset 0x9a38c

hdb: FU
Tuner: loopback=0, ID=-1 drivedirectory while de
empeg display initialised.t 0x000-0x007,0x038 on irq
empeg dsp audio initialised
hda: FUJITSU MHL23
empeg dsp mixer initialised, CHS=58140/16/63oved menu
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a08kB Cache, CH
Remounting first music
Probing primary interface...
You don't exist. Go away.
R
hda: FUJITSU MHL2300AT, ATA DISK driveo ram disk... done.

hdb: FUJITSU MHL2300AT, ATA DISK drive
VFS: Mounted root (ext2 filesystem).
ide0 at 0x000-0x007,0x038 on irq 6
empeg-pump v0.03 (19980601) -a:
hda: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63 root (ext2 fil

Mounting first

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0c:2 but got error 19: Force fsck on reboot.
Mounting
7c
Partition check:on -n:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4 partition read-only
hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4d music partition read-onlyc: canc
RAMDISK: ext2 filesystem found at block 0now to go into development mode. You Have
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
Starting player
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply.ūStar
ting player
Hijack: intercepting config.ini

hijack_exec("/usr/local/bin/emphatic"), rc=0 (okay)
hijack: removed menu entry: "Hard Disk Detection"
khttpd: listening on port 80
kftpd: listening on port 21
opening display...
Using non-standard cache size 86 (adjustment 48)
starting notify thread...
notify thread started (tid=1026)...
lyrics thread started (tid=2051)...
emphatic v1.10 (built Feb 18 2003 20:15:18) running as pid 11
player.cpp : 385:empeg-car 2.00 2003/04/01.
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4056d000







And then this is when I synchronize:

Adding Swap: 16596k swap-space (priority -2)
disk.cpp : 876:Couldn't cleanly unmount drive 0 (c0041010)
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether /dev/
hda4 is mounted.
hijack: removed menu entry: "emphatic"
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
Restart code received
Starting player
Hijack: intercepting config.ini

hijack_exec("/usr/local/bin/emphatic"), rc=0 (okay)
opening display...
Using non-standard cache size 86 (adjustment 48)
player.cpp : 385:empeg-car 2.00 2003/04/01.
starting notify thread...
notify thread started (tid=1026)...
lyrics thread started (tid=2051)...
emphatic v1.10 (built Feb 18 2003 20:15:18) running as pid 55

Hope this helps.
_________________________
One of the last MK2's from SonicBlue... Blue/60gig S/N: 030103111