
Quick Links:
Empeg FAQ
|
RioCar.Org
|
Hijack
|
BigDisk Builder
|
jEmplode
|
emphatic
Repairs: Repairs
|
#242477 - 24/11/2004 22:19
Re: Did the shop wire my Empeg and amp and sub correctly?
[Re: hybrid8]
|
member
Registered: 15/06/2002
Posts: 127
|
Quote: That's a 12v (output) wire from the empeg designed to trigger a relay - also known as "remote". Example: activating the motor for a power antenna and activating an amp's main power.
You most definitely shouldn't touch it to any bare metal on (or that's attached to) the car's chasis. That will create a short circuit (and I hope that wire is protected by a fuse). It's super-low current, so you can't really power anything directly off it.
So, if that's not hooked up, do you have another head unit triggering the JL amp and Bazooka? Or did they install some type of line-level trigger? I know the JL must be triggered by 12v connected to its remote input.
Bruno
I only have the Empeg unit installed, the JL amp is powered from the Empeg and the Bazooka tube is pre amped and powered off the Empeg as well.
|
Top
|
|
|
|
|
|
|