Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#108723 - 01/08/2002 04:36 Problem with stock infrared remote
ltd
new poster

Registered: 31/07/2002
Posts: 18
I've had my empeg for maybe 2 months and ever since I got it I have had major problems with the remote - sometimes it just stops working... I've checked the battery with my tongue and there is plenty of charge in it...

Top
#108724 - 01/08/2002 04:57 Re: Problem with stock infrared remote [Re: ltd]
F0X
member

Registered: 31/03/2002
Posts: 100
Loc: Alberta, Canada
I dont know if this can be stressed enough, but change the battery. Several different methods have been devised to test the current batteries, and although it appears the batteries should be good, in most cases, replacing the batteries solves the problem. I too had a remote die after a couple months. New battery fixed it completely.
_________________________
F0X 3xMkIIa

Top
#108725 - 01/08/2002 05:20 Re: Problem with stock infrared remote [Re: F0X]
ltd
new poster

Registered: 31/07/2002
Posts: 18

Like I said though, it hasn't just stopped working, it just doesn't work for a few minutes and after I set it down for a while it starts working again. It has also been this way since I got it.

Top
#108726 - 01/08/2002 05:39 Re: Problem with stock infrared remote [Re: ltd]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
Right. Replace the battery. Seriously.

Edit: BTW, Tony, if you're reading this, it might make sense to point out in the FAQ that the battery is a CR2025, just in case it helps someone sometime.


Edited by wfaulk (01/08/2002 05:44)
_________________________
Bitt Faulk

Top
#108727 - 01/08/2002 06:04 Re: Problem with stock infrared remote [Re: wfaulk]
ltd
new poster

Registered: 31/07/2002
Posts: 18
Okay I'm going to the servo now to try and find a new one.

Will report.

----

They didn't have any. I just put a multimeter to the battery and it's showing a steady 2.7V which should be more than enough to drive the remote properly.


Edited by ltd (01/08/2002 06:21)

Top
#108728 - 01/08/2002 07:14 Re: Problem with stock infrared remote [Re: ltd]
F0X
member

Registered: 31/03/2002
Posts: 100
Loc: Alberta, Canada
You cant reliably test a battery by using a multimeter. That puts no load on the battery. Also, even at 2.7V the battery is considerably drained. Also, the symptom of it working for a few minutes and then dying really does point towards a battery. Search as many threads about batteries as you like, and you will see that time and time again, it is the battery.
_________________________
F0X 3xMkIIa

Top
#108729 - 01/08/2002 08:05 Re: Problem with stock infrared remote [Re: ltd]
mrfixit
enthusiast

Registered: 14/06/2002
Posts: 337
Yes please take everyones advice and replace the battery, at 2.7 volt when you press a button on the remote and light up that current sucking ir led it probably drops to 1v, and it takes around 2.5-2.6 just to light the led.
_________________________
Ben
mk2a 60gig green/Greenlights Buttons
mk2a 60gig green/Greenlights Buttons
mk2a 40gig blue no illumination....yet
hijacked

Top
#108730 - 01/08/2002 09:28 Re: Problem with stock infrared remote [Re: ltd]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31600
Loc: Seattle, WA
Ltd, please read the FAQ entry "My Remote Control Quit Working" by clicking here.

Thanks, Bitt, for the suggestion that I give the battery number.
_________________________
Tony Fabris

Top
#108731 - 01/08/2002 22:18 Re: Problem with stock infrared remote [Re: tfabris]
revlmwest
addict

Registered: 05/06/2002
Posts: 497
Loc: Hartsville, South Carolina for...
I had the exact same problem right out of the box.... It was the battery. Short of destroying the casing I'm not sure you can break the remote. Mines been through the washing machine twice.
_________________________
Michael West

Top
#108732 - 01/08/2002 22:34 Re: Problem with stock infrared remote [Re: revlmwest]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31600
Loc: Seattle, WA
I've heard of compulsive hand-washing, but this sounds like something new to me.
_________________________
Tony Fabris

Top
#108733 - 01/08/2002 22:49 Re: Problem with stock infrared remote [Re: tfabris]
revlmwest
addict

Registered: 05/06/2002
Posts: 497
Loc: Hartsville, South Carolina for...
heh... The perils of having someone else do the wash.
_________________________
Michael West

Top
#108734 - 02/08/2002 02:47 Re: Problem with stock infrared remote [Re: revlmwest]
thinfourth2
Pooh-Bah

Registered: 13/04/2001
Posts: 1742
Loc: The land of the pale blue peop...
Be thankfull the empeg ain't pocket sized
_________________________
P.Allison fixer of big engines Mk2+Mk2a signed by God / Hacked by the Lord Aberdeen Scotland

Top
#108735 - 05/08/2002 04:01 Re: Problem with stock infrared remote [Re: thinfourth2]
ltd
new poster

Registered: 31/07/2002
Posts: 18

I went to dick smith and got a replacement battery, all seems well so far... the range seems much better and the battery has a bit more bite when I put it on my tongue so now just a little wood touching.

Top
#108736 - 05/08/2002 04:34 Re: Problem with stock infrared remote [Re: ltd]
tman
carpal tunnel

Registered: 24/12/2001
Posts: 5528
I hope you check that the battery hasn't leaked before doing the tongue test! Can't be good for you if it has

- Trevor

Top
#108737 - 05/08/2002 09:49 Re: Problem with stock infrared remote [Re: ltd]
AndrewT
old hand

Registered: 16/02/2002
Posts: 867
Loc: Oxford, UK
Ideally you should avoid handling the battery as much as you can because any sweat (or saliva?) residue will cause a miniscule current drain that may shorten the life of the battery even when not in use.

Top
#108738 - 05/08/2002 11:29 Re: Problem with stock infrared remote [Re: ltd]
thinfourth2
Pooh-Bah

Registered: 13/04/2001
Posts: 1742
Loc: The land of the pale blue peop...
Pain


Natures multimeter

Measures temperature and voltage

Multiranging hmm, ouch, ahhhhh, oh **** and death.
_________________________
P.Allison fixer of big engines Mk2+Mk2a signed by God / Hacked by the Lord Aberdeen Scotland

Top
#108739 - 05/08/2002 15:11 Re: Problem with stock infrared remote [Re: thinfourth2]
mrfixit
enthusiast

Registered: 14/06/2002
Posts: 337
Just dont do it if you have braces, one of my friends did that and hit his braces with a 9v and um... well.... his mouth started smoking.
_________________________
Ben
mk2a 60gig green/Greenlights Buttons
mk2a 60gig green/Greenlights Buttons
mk2a 40gig blue no illumination....yet
hijacked

Top