Yeah I've even turned the empeg to 10db overdrive..You should only need it to be at 0db.
Also: Make sure you're not one of the folks having trouble with the Empeg getting confused about whether it's in the house or in the car. If it thinks it's in the car, the fader might be set wrong and the front outputs might not be making any noise. Also make sure the unit isn't paused or trying to play an empty playlist.
But yeah, I made sure all the inputs in the sound widget control panel thing are on and up.Not all of them. Just "line". Make sure you've plugged the empeg into the line input on your card (make sure, even if it involves pulling the sound card's manual to decipher the labeling on the plugs), then make sure that the sound widget is, in fact, showing a "line" fader. If it's not, then that's your problem:
Options/Properties
Adjust volume for... Playback
Show the following volume controls: Line
OK
Set the line fader to a decent place and uncheck "mute".
If you're still getting no sound, then there's a hardware problem: Bad jack, bad cable, something like that. If you don't have a "line" option at all, then it's a software driver problem.
___________
Tony Fabris