I decided to test out v389, but as I require ext3 I decided to compile it up as Mike hasn't as yet. I'd done them in the past so I thought why not (although last time I tried was before Mark was splitting each revision (so about v300).

Anyway, I started with a clean slate as far as the empeg source were concerned. I untared the v387 and applied the 2 patches to that.

Then did the the rest.

Anyway during the build it fails with :-

arm-empeg-linux-gcc -D__KERNEL__ -I/data/empeg/tarballs/kernel/v389/include -Wall -Wstrict-prototypes -O2 -fno-strict-aliasing -pipe -msoft-float -march=armv4
-mtune=strongarm110 -c -o time.o time.c
time.c:68: redefinition of `mktime'
/usr/local/armtools-empeg/lib/gcc-lib/arm-empeg-linux/2.95.3/../../../../arm-empeg-linux/include/linux/time.h:71: `mktime' previously defined here
time.c:86: warning: `do_profile' defined but not used
make[1]: *** [time.o] Error 1
make[1]: Leaving directory `/data/empeg/tarballs/kernel/v389/arch/arm/kernel'
make: *** [_dir_arch/arm/kernel] Error 2

Oh at this point I haven't changed the .config file to enable ext3.

Any ideas?

Just edit v389/arch/arm/kernel/time.c and comment out the offending mktime() function around line 68. Something different between my build setup and that which nearly everyone else ends up with.

Cheers

I'll put out Hijack v390 in 10 minutes or so with the long delayed fix for this annoyance.

cheers

Mark thanks for that. I'll try that after work. Then should be able to test v390+ext3 on a mk2a.

v390+ext3 works fine on my 16mb mk2a. Hopefully the same when I get my 32mb

I decided to compile it up as Mike hasn't as yet

I finally got off my lazy a** and put up an updated version (391) today. I wouldn't normally bother posting about it, but I was 20 some odd versions out of date so I figured somebody else might be interested in a more current version.

The one I just posted also has the dubious distinction of having been compiled under OS X (thats a first, for me at least).

-Mike