Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#233165 - 10/09/2004 15:19 Home Networking ?
DBALKUNJR
member

Registered: 17/12/2001
Posts: 194
My other half has decided that my desk with all my electronics is taking up too much space where it currently resides in the den, thus I am being evicted to a spare bedroom. Problem is that I do not want to reroute all my network connections to the spare bedroom. Can I run one Cable from the spare bedroom to the den connecting theend in the bedroom up to my Linksys router and the other end into a switch or hub so that I do not have to run all the connections back to the bedroom?
_________________________
Dave

MK2 12Gb
MK2a 60Gb

Top
#233166 - 10/09/2004 15:21 Re: Home Networking ? [Re: DBALKUNJR]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31600
Loc: Seattle, WA
Of course. That's the whole point of switches and hubs.
_________________________
Tony Fabris

Top
#233167 - 11/09/2004 03:28 Re: Home Networking ? [Re: DBALKUNJR]
peakmop
journeyman

Registered: 02/07/2004
Posts: 95
Loc: 384400 km from the Moon
You don't even need that one cable. You can get a pair of Linksys
WRT54G or WRT54GS Wireless-G routers dirt cheap at Walmart. Grab a firmware update from sveasoft.com and you'll be good to go with a router and a wireless repeater in your bedroom. The downside to this is that you'll have less bandwidth than with 100 Mb/s wired router.

Top
#233168 - 11/09/2004 04:20 Re: Home Networking ? [Re: peakmop]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
Actually, if the only thing on the remote side of the wireless connection is the internet connection, there shouldn't be any speed difference, as the computer-to-computer connections will all be through the 100Mbps hub built into the wireless adapter.
_________________________
Bitt Faulk

Top