DC adapter question.. | Off Topic | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » General Discussion » Off Topic » DC adapter question..

Topic Options

#283578 - 24/06/2006 07:35 DC adapter question..
JaBZ addict Registered: 08/08/2001 Posts: 452 Loc: NZ	Thought I'd pose this question for you electronics guru's I have a Lacrosse projection clock imported from US, which came with a (110v) DC adapter that outputs 3.4v 100mA. I am finding it difficult to source a (240v) DC adapter that outputs the same voltage, this is compunded by the fact that the plug is angled and small (fits into bottom of clock).. I can find lots of variable voltage DC adapters both regulated and unregulated that output 3, 4.5, 6, 9, 12 volts. Would powering this clock with one of these unregulated adapters set at 3volts do any damage? Is it correct that using an unregulated adapter with more than the required amperage mean the adapter will supply slightly more voltage?
Top

#283579 - 24/06/2006 08:27 Re: DC adapter question.. [Re: JaBZ]
Shonky pooh-bah Registered: 12/01/2002 Posts: 2009 Loc: Brisbane, Australia	Quote: Is it correct that using an unregulated adapter with more than the required amperage mean the adapter will supply slightly more voltage? Yes. But how much depends on what current rating the transformer has. Personally, I'd probably try a 3V regulated supply and see if it works and go from there _________________________ Christian #40104192 120Gb (no longer in my E36 M3, won't fit the E46 M3)
Top

#283580 - 24/06/2006 11:30 Re: DC adapter question.. [Re: Shonky]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	Quote: Quote: Is it correct that using an unregulated adapter with more than the required amperage mean the adapter will supply slightly more voltage? Yes. But how much depends on what current rating the transformer has. Personally, I'd probably try a 3V regulated supply and see if it works and go from there Yeah. The product page even says it's made to run on 3VDC, so that should work. -ml
Top

#283581 - 24/06/2006 11:35 Re: DC adapter question.. [Re: mlord]
Shonky pooh-bah Registered: 12/01/2002 Posts: 2009 Loc: Brisbane, Australia	I hadn't looked at the product page until now. It says it runs off 2 x AA (i.e. 3V). The manual actually says the adapter is 6V/100mA _________________________ Christian #40104192 120Gb (no longer in my E36 M3, won't fit the E46 M3)
Top

#283582 - 25/06/2006 22:56 Re: DC adapter question.. [Re: Shonky]
JaBZ addict Registered: 08/08/2001 Posts: 452 Loc: NZ	Yea I think the manual is wrong, I've got the adapter in my hands and it says the output is 3.4v unless the clock can handle upto 6v but I'm not willing to find out. I may just end up buying this and plugging the adapter into it. Edited by JaBZ (26/06/2006 07:22)
Top

#283583 - 26/06/2006 01:34 Re: DC adapter question.. [Re: JaBZ]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14496 Loc: Canada	Quote: Yea I think the manual is wrong, I've got the adapter in my hands and it says the output is 3.4v unless the clock can handle upto 6v but I'm not willing to find out. MMmm.. perhaps it has internal voltage regulation -- risky to experiment and find out (or not!) though. The Alcatel Speed Touch xDSL modems are like that here. Various models from various ISPs are provided with AC adapters whose outputs range from +9VDC to +18VDC, and they're all interchangeable. Quote: I may just end up buying this and plugging the adapter into it. Sensible, and reusable for other stuff in the future. I seem to recall Mach having a huge transformer in the flat in Paris, with lots of USA audio gear plugged into the output of it. Cheers
Top

View All Topics