303 face dimensions... | General | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » General » 303 face dimensions...

Topic Options

#304001 - 11/11/2007 03:43 303 face dimensions...
Charles Beer new poster Registered: 05/11/2007 Posts: 37	Anyone have a 303 fascia that could possibly measure it for me and send detailed dimensions? I'd like to create one very similar but neet dimensions 1st. Need exact hole size and location for buttons etc. Any help appreciated. I really want to get this done within the next 2 months while we are slow around the holidays. Thanks in advance...
Top

#304002 - 14/11/2007 23:49 Re: 303 face dimensions... [Re: Charles Beer]
FireFox31 pooh-bah Registered: 19/09/2002 Posts: 2494 Loc: East Coast, USA	I can tell you the size of the NewFace button holes must be larger than 6.5mm across. That's the diameter of the Multimec button caps intended for the fascia. Maybe webroach has the measurements from his previous effort. _________________________ - FireFox31 110gig MKIIa (30+80), Eutronix lights, 32 meg stacked RAM, Filener orange gel lens, Greenlights Lit Buttons green set
Top

#304003 - 15/11/2007 11:56 Re: 303 face dimensions... [Re: FireFox31]
Charles Beer new poster Registered: 05/11/2007 Posts: 37	Thanks for the information. I may just have to do this the harder way since nobody can help a man out. Ah well. Quote: I can tell you the size of the NewFace button holes must be larger than 6.5mm across. That's the diameter of the Multimec button caps intended for the fascia. Maybe webroach has the measurements from his previous effort.
Top

#304004 - 15/11/2007 12:59 Re: 303 face dimensions... [Re: Charles Beer]
andy carpal tunnel Registered: 10/06/1999 Posts: 5916 Loc: Wivenhoe, Essex, UK	To be fair it is only 4 days since you asked the question, not everyone checks the bbs that often. You may still get an answer from someone who has the information you need. _________________________ Remind me to change my signature to something more interesting someday
Top

#304005 - 15/11/2007 22:15 Re: 303 face dimensions... [Re: andy]
Charles Beer new poster Registered: 05/11/2007 Posts: 37	Quote: To be fair it is only 4 days since you asked the question, not everyone checks the bbs that often. You may still get an answer from someone who has the information you need. Oh I know. I'm just anixous to get going on it. Lots of downtime in our business around holidays. It would just be easier on me if someone could've provided the dimensions.
Top

#305711 - 03/01/2008 21:57 Re: 303 face dimensions... [Re: Charles Beer]
Charles Beer new poster Registered: 05/11/2007 Posts: 37	anyone got a face they could measure with calipers? would just make my job a little easier here...
Top

#306768 - 01/02/2008 20:05 Re: 303 face dimensions... [Re: Charles Beer]
Charles Beer new poster Registered: 05/11/2007 Posts: 37	anyone? bueller? surely someone has one laying around they could measure?
Top

#306782 - 02/02/2008 08:05 Re: 303 face dimensions... [Re: Charles Beer]
LittleBlueThing addict Registered: 11/01/2002 Posts: 612 Loc: Reading, UK	Just FYI - I don't have a 303 face Can't you use a standard face - or don't you have one? If not then I'd be happy to measure my spare standard face for you. _________________________ LittleBlueThing Running twin 30's
Top

#306784 - 02/02/2008 08:12 Re: 303 face dimensions... [Re: LittleBlueThing]
Charles Beer new poster Registered: 05/11/2007 Posts: 37	Originally Posted By: LittleBlueThing Just FYI - I don't have a 303 face Can't you use a standard face - or don't you have one? If not then I'd be happy to measure my spare standard face for you. well i was looking to make a duplicate of the 303 design which i liked. so the holes and stuff are different size than the standard. not too bad to figure out but much easier if you have one already....
Top

#306822 - 03/02/2008 14:12 Re: 303 face dimensions... [Re: Charles Beer]
mtempsch pooh-bah Registered: 02/06/2000 Posts: 1996 Loc: Gothenburg, Sweden	Quote: well i was looking to make a duplicate of the 303 design which i liked. so the holes and stuff are different size than the standard. not too bad to figure out but much easier if you have one already.... Been reading the board very sporadically and just stumbled into this thread. I've got a 303 face - what measurements are you looking for? Or maybe I'll just whip up a crude pic and add basic measurements and then you can specifically ask for any more measurements you need. I'll go look for the allen key... _________________________ /Michael
Top

#306824 - 03/02/2008 14:16 Re: 303 face dimensions... [Re: mtempsch]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Originally Posted By: mtempsch Quote: well i was looking to make a duplicate of the 303 design which i liked. so the holes and stuff are different size than the standard. not too bad to figure out but much easier if you have one already.... Been reading the board very sporadically and just stumbled into this thread. I've got a 303 face - what measurements are you looking for? Or maybe I'll just whip up a crude pic and add basic measurements and then you can specifically ask for any more measurements you need. I'll go look for the allen key... Perhaps the best thing might be: if you have a flatbed scanner, just scan the 303 face at 300dpi and make the image available to him. Cheers Edited by mlord (03/02/2008 14:17)
Top

#306843 - 04/02/2008 07:30 Re: 303 face dimensions... [Re: mtempsch]
julf veteran Registered: 01/10/2001 Posts: 1307 Loc: Amsterdam, The Netherlands	Originally Posted By: mtempsch I'll go look for the allen key... It's taped to the underside of the bottom shelf on the Ikea bookshelf!
Top

#306863 - 04/02/2008 13:55 Re: 303 face dimensions... [Re: julf]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Originally Posted By: julf Originally Posted By: mtempsch I'll go look for the allen key... It's taped to the underside of the bottom shelf on the Ikea bookshelf! Heh.. I finally got tired of looking for my sole 2.5mm allen key here, and went out to the local hardware shop and purchased two more for $0.35/each. Cheers
Top

#306877 - 04/02/2008 18:27 Re: 303 face dimensions... [Re: julf]
mtempsch pooh-bah Registered: 02/06/2000 Posts: 1996 Loc: Gothenburg, Sweden	Originally Posted By: julf Originally Posted By: mtempsch I'll go look for the allen key... It's taped to the underside of the bottom shelf on the Ikea bookshelf! Nooo, Im pretty sure those are bigger than the one needed for the face... Maybe if IKEA got into doll furniture? Actually have 6 or 7 IKEA allen keys lying at the rear of a drawer in the living room bookshelf. (Not that long since purchased and assembled) And a fistful in the kitchen junk drawer. _________________________ /Michael
Top

#306882 - 04/02/2008 19:27 Re: 303 face dimensions... [Re: mtempsch]
Robotic pooh-bah Registered: 06/04/2005 Posts: 2026 Loc: Seattle transplant	Originally Posted By: mtempsch ... And a fistful in the kitchen junk drawer. That's where they belong. /tool snob _________________________ 10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
Top

#306923 - 05/02/2008 19:17 Re: 303 face dimensions... [Re: Robotic]
canuckInOR carpal tunnel Registered: 13/02/2002 Posts: 3212 Loc: Portland, OR	Originally Posted By: Robotic Originally Posted By: mtempsch ... And a fistful in the kitchen junk drawer. That's where they belong. /tool snob Along with the IKEA furniture. /furniture snob
Top

#306925 - 05/02/2008 19:25 Re: 303 face dimensions... [Re: canuckInOR]
wfaulk carpal tunnel Registered: 25/12/2000 Posts: 16706 Loc: Raleigh, NC US	"Enjoy your affordable Sveedish crap!" _________________________ Bitt Faulk
Top

#306926 - 05/02/2008 19:25 Re: 303 face dimensions... [Re: canuckInOR]
andy carpal tunnel Registered: 10/06/1999 Posts: 5916 Loc: Wivenhoe, Essex, UK	Originally Posted By: canuckInOR Originally Posted By: Robotic Originally Posted By: mtempsch ... And a fistful in the kitchen junk drawer. That's where they belong. /tool snob Along with the IKEA furniture. /furniture snob Some of their stuff is very well designed and made (though often you go to buy the same thing next year to find it has been redesigned subtly to reduce costs and is no longer any good). Some of the stuff is utter crap of course. Edited by andy (05/02/2008 19:39) _________________________ Remind me to change my signature to something more interesting someday
Top

#306934 - 05/02/2008 20:52 Re: 303 face dimensions... [Re: andy]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	Cue Coulton. _________________________ Tony Fabris
Top

#306956 - 06/02/2008 16:23 Re: 303 face dimensions... [Re: andy]
canuckInOR carpal tunnel Registered: 13/02/2002 Posts: 3212 Loc: Portland, OR	Originally Posted By: andy Originally Posted By: canuckInOR Originally Posted By: Robotic Originally Posted By: mtempsch ... And a fistful in the kitchen junk drawer. That's where they belong. /tool snob Along with the IKEA furniture. /furniture snob Some of their stuff is very well designed and made (though often you go to buy the same thing next year to find it has been redesigned subtly to reduce costs and is no longer any good). Some of the stuff is utter crap of course. True enough. It's not the designs I don't like, so much as it is that nearly everything is made from veneered particle board that chips if you even so much as look at it sideways. The pieces that are made using plywood or solid wood are still pretty reasonable, but they're becoming more and more rare.
Top

#306962 - 06/02/2008 18:35 Re: 303 face dimensions... [Re: canuckInOR]
tanstaafl. carpal tunnel Registered: 08/07/1999 Posts: 5549 Loc: Ajijic, Mexico	Quote: nearly everything is made from veneered particle board that chips if you even so much as look at it sideways. I found a solution to that with my cheap computer desk/hutch thing. I just put a coat of clear Varathane on the desktop surface and it has lasted many years. tanstaafl. _________________________ "There Ain't No Such Thing As A Free Lunch"
Top

View All Topics