here is the log showing empeg sees it

If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.03
Copying kernel...
Calling linux kernel...
Uncompressing Linux................................... done, booting the kernel.

Linux version 2.2.14-rmk5-np17-empeg43 (mac@aphex.internal.empeg.com) (gcc versi
on 2.95.2 19991024 (release)) #214 Sat Jun 23 16:38:57 BST 2001
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 7, serial number 90000723)
Command line: mem=12m temp=31
Calibrating delay loop... 207.67 BogoMIPS
Memory: 11008k/12M available (960k code, 20k reserved, 292k data, 8k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is ffffffff 'ÿÿÿÿ'
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0004800).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: IBM-DARA-206000, ATA DISK drive
hdb: IBM-DJSA-220, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DARA-206000, 5729MB w/418kB Cache, CHS=12416/15/63
hdb: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:02:d
3
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...t: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 8k initI see this is a developer image!
Mounting proc
Tried to mount /proc but got error 16
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
empeg-car 1.01.

Okay, did you run the builder image on the second drive AND do a full install of 1.03 onto the second drive as described in the FAQ? And did you do at least one synch?

___________
Tony Fabris

ok I did the upgrade as stated in the fAq to the 2nd drive did I read wrong..then I added one file to the empeg to see if it would show and no luck.. then i just updated my emplode and my firsts drive to 1.03 builder.

you got AOL's IM?

ITS WORKING... I HAD TO UPGRADE MY FIRST DRIVE... YIPPIE!! THANKS FOR RESPONDING THOUGH



AHHHHH I LOVE THIS

you got AOL's IM?

Nah, I use ICQ. And lately, Trillian as an ICQ-replacement.

I do have an AOL Instant Messenger account, but for some reason, Trillian looks like it might be having trouble with it. Some of my AIM buddies do not show up even when they're online. Perhaps it's one of AOL's countermeasures to prevent third-party software from using their system.

___________
Tony Fabris

Trillian works a treat for me, use it for AOL and Yahoo buddies, not using it at all for ICQ. Very handy as Trillian also starts and automagically joins me to the Empeg channel on IRC.

- --
Rod, UK Mk2 64gig Red S/No.341 2xDell RioReceiver

thanks for responding.. next upgrade will be when these 45gb ibm drives go down to 150